NOR FLASH Memory IC W25Q80DVSSAG Winbond datasheet pdf price

The winbond W25Q80DV/DL (8M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The winbond W25Q80DV operates on a single 2.7V to 3.6V and the winbond W25Q80DL operateds on a single 2.3V to 3.6V power supply with current consumption as low as 1μA for power-down.

The winbond W25Q80DV/DL array is organized into 4,096 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The winbond W25Q80DV/DL has 256 erasable sectors and 16 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage.

The winbond W25Q80DV supports the standard Serial Peripheral Interface (SPI), and a high performance Dual/Quad output as well as Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O instructions. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories. A Hold pin, Write Protect pin and programmable write protection, with top, bottom or complement array control, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device identification with a 64-bit 0Unique Serial Number.

Family of SpiFlash Memories
– W25Q80DV/DL: 8M-bit/1M-byte (1,048,576)
– 256-byte per programmable page
– Standard SPI: CLK,/CS,DI,DO,/WP,/Hold
– Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold
– Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
– Uniform 4KB Sectors, 32KB & 64KB Blocks

Highest Performance Serial Flash
– winbond W25Q80DV
104MHz Dual/Quad SPI clocks
208/416MHz equivalent Dual/Quad SPI
50MB/S continuous data transfer rate

Software and Hardware Write Protection
– Write-Protect all or portion of memory
– Enable/Disable protection with /WP pin
– Top or bottom array protection

Flexible Architecture with 4KB sectors
– Uniform Sector/Block Erase (4/32/64-kbytes)
– Erase/Program Suspend & Resume
– More than 100,000 erase/write cycles
– More than 20-year data retentio

Low Power, Wide Temperature Range
– winbond W25Q80DV: Single 2.7 to 3.6V supply
– winbond W25Q80DL: Single 2.3 to 3.6V supply
– <1μA Power-down(typ.)

Advanced Security & Identification Features
– Software and Hardware Write-Protect
– Top/Bottom, 4KB complement array protection
– Power Supply Lock-Down and OTP protection
– 64-Bit Unique ID for each device
– Discoverable Parameters (SFDP) Register
– 3X256-Byte Security Registers with OTP locks
– Volatile & Non-volatile Status Register Bits

Space Efficient Packaging(1):
– 8-pin SOIC 150-mil/208mil, VSOP 150-mil
– 8-pad WSON 6×5-mm, USON 2×3-mm
– 8-pin PDIP 300-mil
– 8-ball WLCSP
– Contact Winbond for KGD and other options