Winbond W25X40CLSSIG FLASH Memory IC Stock

The W25X40CLSSIG (4M-bit) Serial Flash memories provides a storage solution for systems with limited space, pins and power. The 25X series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code download applications as well as storing voice, text and data. The devices operate on a single 2.3V to 3.6V power supply with current consumption as low as 1mA active and 1μA for power-down. All devices are offered in space-saving packages.

The W25X40CLSSIG arrays are organized into 2048 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. The W25X40CLSSIG have 128 erasable sectors, 16 erasable 32KB blocks and 8 erasable 64KB blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage.

The W25X40CLSSIG support the standard Serial Peripheral Interface (SPI), and a high performance dual output as well as Dual I/O SPI: Serial Clock, Chip Select, Serial Data DI (I/O0), DO (I/O1). SPI clock frequencies up to 104MHz are supported allowing equivalent clock rates of 208MHz when using the Fast Read Dual Output instruction. These transfer rates are comparable to those of 8 and 16-bit Parallel Flash memories. The Continuous Read Mode allows for efficient memory access with as few
as 16-clocks of instruction-overhead to read a 24-bit address, allowing true XIP (execute in place) operation.

A Hold pin, Write Protect pin and programmable write protect, with top or bottom array control features, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device identification with a 64-bit Unique Serial Number.

Family of Serial Flash Memories
– W25X40CL: 4M-bit/512K-byte (524,288)
– 256-bytes per programmable page
– Uniform erasable 4KB, 32KB & 64KB regions.

SPI with Single / Dual Outputs / I/O
– Standard SPI: CLK, /CS, DI, DO, /WP, /Hold
– Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold

Data Transfer up to 208M-bits / second
– Clock operation to 104MHz
–208MHz equivalent Dual SPI
– Auto-increment Read capability

Efficient “Continuous Read Mode”
– Low Instruction overhead
– Continuous Read
– As few as 16 clocks to address memory
– Allows true XIP (execute in place) operation

Flexible Architecture with 4KB sectors
– Uniform Sector/Block Erase (4/32/64-kbytes)
– Page program up to 256 bytes <1ms
– More than 100,000 erase/write cycles
– More than 20-year data retention

Low Power, Wide Temperature Range
– Single 2.3V to 3.6V supply
– 1mA active current, <1μA Power-down(typ.)
– -40° to +85°C operating range

Space Efficient Packaging
– 8-pin SOIC 150-mil / VSOP 150-mil
– 8-pin SOIC 208-mil
– 8-pin PDIP 300-mil
– 8-pad WSON 6×5-mm
– 8-pad USON 2×3-mm
– 8-pin PDIP 300-mil
– Contact Winbond for KGD and other options