- Sorry, this product cannot be purchased.
Product Details
STM32G473VET6 IC MCU+FPU 32BIT 512KB FLASH 100LQFP In stock
STM32G473VET6 Mainstream Arm Cortex-M4 core with DSP and FPU, 170MHz with 512Kbytes of Flash memory, Math Accelerator, High Analog level integration
STM32G473VET6 Mainstream Arm Cortex-M4 core with DSP and FPU, 170MHz with 512Kbytes of Flash memory, Math Accelerator, High Analog level integration
The STM32G473VET6 devices are based on the high-performance Arm® Cortex®-M4 32-bit RISC core. They operate at a frequency of up to 170 MHz.
The Cortex-M4 core features a single-precision floating-point unit (FPU), which supports all the Arm single-precision data-processing instructions and all the data types. It also implements a full set of DSP (digital signal processing) instructions and a memory protection unit (MPU) which enhances the application’s security.
These devices embed high-speed memories (512 Kbytes of Flash memory, and 128 Kbytes of SRAM), a flexible external memory controller (FSMC) for static memories (for devices with packages of 100 pins and more), a Quad SPI Flash memory interface, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.
The devices also embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, securable memory area and proprietary code readout protection.
The devices embed peripherals allowing mathematical/arithmetic function acceleration (CORDIC for trigonometric functions and FMAC unit for filter functions).
They offer five fast 12-bit ADCs (5 Msps), seven comparators, six operational amplifiers, seven DAC channels (3 external and 4 internal), an internal voltage reference buffer, a low-power RTC, two general-purpose 32-bit timers, three 16-bit PWM timers dedicated to motor control, seven general-purpose 16-bit timers, and one 16-bit low-power timer.
Our advantages include original and authentic products, core traceable channels, helping customers find cost-effective alternative models, flexible procurement transactions (flexible settlement methods), overseas purchasing, direct supply of spot goods, support for small batches, upstream and downstream resource matching, and technical support.
• Core: Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from Flash memory, frequency up to 170 MHz with 213 DMIPS, MPU, DSP instructions
• Operating conditions:
• VDD, VDDA voltage range: 1.71 V to 3.6 V
• Mathematical hardware accelerators
• CORDIC for trigonometric functions acceleration
• FMAC: Filter mathematical accelerator
• Memories
• 512 Kbytes of Flash memory with ECC support, two banks read-while-write, proprietary code readout protection (PCROP), securable memory area, 1 Kbyte OTP
• 96 Kbytes of SRAM, with hardware parity check implemented on the first 32 Kbytes
• Routine booster: 32 Kbytes of SRAM on instruction and data bus, with hardware parity check (CCM SRAM)
• External memory interface for static memories FSMC supporting SRAM, PSRAM, NOR and NAND memories
• Quad-SPI memory interface
• Reset and supply management
• Power-on/power-down reset (POR/PDR/BOR)
• Programmable voltage detector (PVD)
• Low-power modes: sleep, stop, standby and shutdown
• VBAT supply for RTC and backup registers
• Clock management
• 4 to 48 MHz crystal oscillator
• 32 kHz oscillator with calibration
• Internal 16 MHz RC with PLL option (± 1%)
• Internal 32 kHz RC oscillator (± 5%)
• Up to 107 fast I/Os
• All mappable on external interrupt vectors
• Several I/Os with 5 V tolerant capability
• Interconnect matrix
• 16-channel DMA controller
• 5 x 12-bit ADCs 0.25 μs , up to 42 channels. Resolution up to 16-bit with hardware oversampling, 0 to 3.6 V conversion range• 7 x 12-bit DAC channels
• 3 x buffered external channels 1 MSPS
• 4 x unbuffered internal channels 15 MSPS
• 7 x ultra-fast rail-to-rail analog comparators
• 6 x operational amplifiers that can be used in PGA mode, all terminals accessible
• Internal voltage reference buffer (VREFBUF) supporting three output voltages (2.048 V, 2.5 V, 2.95 V)
• 1617 timers:
• 2 x 32-bit timer and 2 x 16-bit timers with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
• 3 x 16-bit 8-channel advanced motor control timers, with up to 8 x PWM channels, dead time generation and emergency stop
• 1 x 16-bit timer with 2 x IC/OCs, one OCN/PWM, dead time generation and emergency stop
• 2 x 16-bit timers with IC/OC/OCN/PWM, dead time generation and emergency stop
• 2 x watchdog timers (independent, window)
• 1 x SysTick timer: 24-bit downcounter
• 2 x 16-bit basic timers
• 1 x low-power timer
• Calendar RTC with alarm, periodic wakeup from stop/standby
• Communication interfaces
• 3 x FDCAN controller supporting flexible data rate
• 4 x I2C Fast mode plus (1 Mbit/s) with 20 mA current sink, SMBus/PMBus, wakeup from stop
• 5 x USART/UARTs (ISO 7816 interface, LIN, IrDA, modem control)
• 1 x LPUART
• 4 x SPIs, 4 to 16 programmable bit frames, 2 x with multiplexed half duplex I2S interface
• 1 x SAI (serial audio interface)
• USB 2.0 full-speed interface with LPM and BCD support
• IRTIM (infrared interface)
• USB Type-C™ /USB power delivery controller (UCPD)
• True random number generator (RNG)
• CRC calculation unit, 96-bit unique ID
• Development support: serial wire debug (SWD), JTAG, Embedded trace macrocell™
Part Number | STM32G473VET6 |
Manufacturer | STMicroelectronics |
Package | 100LQFP |
Operating Temperature | -40°C ~ 85°C (TA) |
Package / Case | 100-LQFP |
Voltage – Supply (Vcc/Vdd) | 1.71V ~ 3.6V |
Number of I/O | 86 |
Core Processor | ARM® Cortex®-M4 |
Core Size | 32-Bit |
Peripherals | Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT |
Program Memory Type | FLASH |
Oscillator Type | Internal |
Category | Embedded – Microcontrollers |
Description | IC MCU 32BIT 512KB FLASH 100LQFP |
Series | STM32G4 |
Mounting Type | Surface Mount |
Supplier Device Package | 100-LQFP (14×14) |
Speed | 170MHz |
RAM Size | 128K x 8 |
Connectivity | CANbus, I²C, IrDA, LINbus, QSPI, SAI, SPI, UART/USART, USB |
Program Memory Size | 512KB (512K x 8) |
Data Converters | A/D 42x12b; D/A 4x12b |
Package_case | 100-LQFP |