NOR Memory Winbond W25Q80DVSNIG datasheet pdf price

winbond W25Q80DVSNIG (8M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The winbond W25Q80DVSNIG operates on a single 2.7V to 3.6V and the winbond W25Q80DL operateds on a single 2.3V to 3.6V power supply with current consumption as low as 1μA for power-down.

winbond W25Q80DVSNIG array is organized into 4,096 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). winbond W25Q80DVSNIG has 256 erasable sectors and 16 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage.

W25Q80DVSNIG supports the standard Serial Peripheral Interface (SPI), and a high performance Dual/Quad output as well as Dual/Quad I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O instructions. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories. A Hold pin, Write Protect pin and programmable write protection, with top, bottom or complement array control, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device identification with a 64-bit Unique Serial Number.

Dual/Quad Serial Peripheral Interface

Uniform 4KB erasable sectors & 32KB/64KB erasable blocks

4,096 pages (256 bytes), page program in 0.8mS (typ.)

Single/Dual/Quad Fast Read instructions

8/16/32/64byte wrap around for Fast Read Dual/Quad I/O instructions

Clock operation up to 104MHz (416MHz equivalent with Quad I/O Read)

2.7 to 3.6V power supply

1µA power down current

-40° to +85°C operating range

Erase/Program suspend / resume, Suspend Status Bit

Factory-programmed unique ID

Electronic ID with Dual/Quad I/O, Hardware and software write protection for top or bottom blocks

Complement Array Protection Bit

3X256byte Security Registers with OTP locks

Lock-Down and OTP protection

Volatile & Non-volatile Status Register Bits

Serial Flash Discoverable Parameters (SFDP)

Package:SOIC8 150mil,SOIC8 208mil,WSON 6X5mm,USON8 2X3mm