product
Products
Home /

SEMICONDUCTORS

/

Electronic Components

/

XTX

/XTX XT25F04DSOIGU Serial NOR Flash Memory

XTX XT25F04DSOIGU Serial NOR Flash Memory

 The XT25F04D Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual SPI:  Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO). The Dual I/O data is transferred at a speed of 208Mbit/s.

  • Brand:

    XTX
  • Product Details

GENERALDESCRIPTION 

The XT25F04D Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual SPI:  Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO). The Dual I/O data is transferred at a speed of 208Mbit/s.


4M -bit Serial Flash 

512 K-byte 

256 bytes per programmable page 

Standard, Dual SPI

Standard SPI: SCLK, CS#, SI, SO

Dual SPI: SCLK, CS#, IO0, IO1

Flexible Architecture 

Sector of 4K-byte 

Block of 32k-byte

Block of 64k-byte 

Software Write Protection 

Write protect all/portion of memory via  software 

Advanced security Features

2*256-Byte Security Registers With OTP Lock 

Package Options 

See 1.1 Available Ordering OPN

All Pb-free packages are compliant RoHS, Halogen-Free and REACH.

Temperature Range & Moisture Sensitivity Level 

Industrial Level Temperature. (-40°C to +85°C), MSL3 

Power Consumption 

20mA maximum active current

13μA typical standby current

Single Power Supply Voltage 

2.7~3.6V 

Support SFDP and 128 bits Unique ID 

Minimum 100,000 Program/Erase Cycle 

High Speed Clock Frequency 

120MHz for fast read with 30pF load 

Dual I/O Data transfer up to 208Mbit/s 

Program/Erase Speed

Page Program time: 0.9ms typical 

Sector Erase time: 55ms typical 

Block Erase time: 0.3s/ 0.45s typical

Chip Erase time: 2.5s typical

Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Product Categories

New Products

Related Products
XTX XT25F02ESOIGU

XTX XT25F02ESOIGU Serial NOR Flash Memory

The XT25F02E Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual SPI:  Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO). The Dual I/O data is transferred at a speed of 160Mbits/s.

XTX XT25Q16DSOIGU

XTX XT25Q16DSOIGU Serial NOR Flash memory

The XT25Q16D (16M-bit) Serial flash supports standard Serial Peripheral Interface (SPI), Dual/Quad SPI:  Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#/RESET#). 

N76E003AT20 MCU

Nuvoton N76E003AT20 MCU development 8051 series

The N76E003 series is particularly suitable for applications such as battery chargers, Sound Blaster audio controllers, LED lighting controllers, small home appliance controllers, thermostats and smoke sensors.

GMT G524C3P81U

GMT Electronic Components Package MSOP-8 G524C3P81U

The G524 is an integrated power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. G524A, G524B, G524C, G524D are 70mΩ RDS(ON).

MX25L1606EM2I-12G

MXIC FLASH MEMORY MX25L1606EM2I-12G SOIC-8_208mil

3V, 16M-BIT [x 1/x 2]  CMOS SERIAL FLASH MEMORYKey Features  • Hold Feature  • Low Power Consumption  • Auto Erase and Auto Program Algorithms  • Additional 512 bit secured OTP for unique identifier

MXIC MX25U1633FZUI

MXIC MX25U1633FZUI 16M-BIT FLASH MEMORY

The MX25U1635E are 16,777,216 bit serial Flash memory, which is configured as 2,097,152 x 8 internally. When it is in two or four I/O read mode, the structure becomes 8,388,608 bits x 2 or 4,194,304 bits x 4.

First-Rank T25S80A

First-Rank T25S80A SOP8 8M BIT SPI NOR FLASH

The T25S80A is 8M-bit Serial Peripheral Interface(SPI) Flash memory, and supports the  Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (/WP), and I/O3  (/HOLD). The Dual I/O data is transferred with speed of 216Mbits/s and the Quad I/O & Quad  output data is transferred with speed of 432Mbits/s. The device uses a single low voltage power  supply, ranging from 2.7 Volt to 3.6 Volt.

NUVOTON I2130YYIR

NUVOTON I2130YYIR Digital audio chip

GENERAL DESCRIPTIONThe ISD2100is a digitalChipCorder®providing single-chip storage and playback of high quality audio. The device features digital de-compression, comprehensive memorymanagement, flash storage,and integrated audio signal path and Class D speaker drivercapable of delivering power of 400mW. This familyutilizes  flash  memory  to  provide  non-volatile  audio  playback  with  duration  up  to 30  seconds (based on 8kHz/4bitADPCMcompression)for a single-chip audio playback solution. The  ISD2100  can  be  controlled  and  programmed  through  an  SPI  serial  interface  or  operated  stand-aloneby triggers applied to the device’s  six GPIO pins.The  ISD2100  requires  no  external  clock  sources  or  components  except  a  speaker  to  deliver  quality audio prompts or sound effects to enhance user interfaces.In  addition  the  part  can  provide  non-volatile  flash  storage  in  1Kbyte  sectors  eliminating  the  need  for additional serial EEPROM/Flash devices.Compared to previousChipCorder series, this device provideshigher sampling frequencies, improved SNR, lower power, fast programming  time and integrated program verification.FEATURESDuration oISD2130–30 seconds based on 8kHz/4bit ADPCM in 1Mbit of flash storageoISD2115A–15seconds based on8kHz/4bit ADPCM in 1Mbit of flash storageAudio Management  oStore pre-recorded audio (Voice Prompts) using high quality digital compressionoUsesimple index based command for playback–no address needed.oExecute pre-programmed macro scripts (Voice Macros) designed to control the configuration of the device and playback Voice Prompts sequences.ControloSerial SPI interface for microprocessor control and programming.oStand-alone control where customized Voice Macro scripts are assigned to GPIO trigger pins.Sample Rateo7sampling frequencies 4, 5.3, 6.4, 8, 12.8, 16 and32kHzare available.oEach Voice Prompt can have optimal sample rate.Compression Algorithmsoμ-Law: 6, 7 or 8 bits per sampleoDifferential μ-Law: 6, 7 or 8 bits per sampleoPCM: 8, 10 or 12 bits per sampleoEnhanced ADPCM: 2, 3, 4 or 5 bits per sampleoVariable-bit-rate optimized compression.This allows best possible compression given a metric of SNR and background noise levels.Oscillator oInternal oscillator with internal reference: factory trimmed to ±1% deviationat room temperature. OutputoPWM: Class D speaker driver to direct drive an 8Ω speaker or buzzer.oDelivers 400mW at 3V supply.I/OsoSPI interface: MISO, MOSI, SCLK, SSB for commands and digital audio datao6 general purpose I/O pins multiplexed withSPI interface.Flash Storageo1Mbit (ISD2130) or 512Kbit (ISD2115A) of storage for combined audio/data.oFast programming time (20...

Please tell us your needs

Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.

partners 9
partners 8
Partners7
Partners6
Partners5
Partners4
Partners3
Partners2
Partners1
Leave a message Request A Free Quote
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.