XTX XT25Q16DSOIGU Serial NOR Flash memory
The XT25Q16D (16M-bit) Serial flash supports standard Serial Peripheral Interface (SPI), Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#/RESET#).
The XT25F02E Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO). The Dual I/O data is transferred at a speed of 160Mbits/s.
Brand:
XTXGENERALDESCRIPTION
The XT25F02E Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the Dual SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO). The Dual I/O data is transferred at a speed of 160Mbits/s.
2M -bit Serial Flash
256 K-byte
256 bytes per programmable page
Standard, Dual SPI
Standard SPI: SCLK, CS#, SI, SO
Dual SPI: SCLK, CS#, IO0, IO1
Flexible Architecture
Sector of 4K-byte
Block of 64k-byte
Software Write Protection
Write protect all/portion of memory via software
Package Options
See 1.1 Available Ordering OPN
All Pb-free packages are compliant RoHS, Halogen-Free and REACH.
Temperature Range & Moisture Sensitivity Level
Industrial Level Temperature. (-40℃ to +85℃), MSL3
Low Power Consumption
20mA maximum active current
13uA Standby current
Single Power Supply Voltage: Full voltage range:
2.7~3.6V
Support 128 bits Unique ID
Minimum 100,000 Program/Erase Cycle
High Speed Clock Frequency
120MHz for fast read with 30PF load
Dual I/O Data transfer up to 160Mbits/s
Program/Erase Speed
Page Program time: 1.3ms typical
Sector Erase time: 75ms typical
Block Erase time: 0.5s typical
Chip Erase time: 1.7s typical
Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.