Home /

Electronic Components



/Winbond WSON8 6*5M W25Q64JVZPIQ

Winbond WSON8 6*5M W25Q64JVZPIQ

3V 64M-BIT



  • Brand:

  • Product Details


The W25Q64JV (64M-bit) Serial Flash memory provides a storage solution for systems with limited space,  pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices.  They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing  voice, text and data. The device operates on 2.7V to 3.6V power supply with current consumption as low as  1µA for power-down. All devices are offered in space-saving packages.

The W25Q64JV array is organized into 32,768 programmable pages of 256-bytes each. Up to 256 bytes can  be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB  block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q64JV has 2,048 erasable sectors and 128 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in  applications that require data and parameter storage.

The W25Q64JV supports the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI: Serial Clock, Chip  Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 and I/O3. SPI clock frequencies of W25Q64JV of up to 133MHz are supported allowing equivalent clock rates of 266MHz (133MHz x 2) for Dual I/O and 532MHz (133MHz x  4) for Quad I/O when using the Fast Read Dual/Quad I/O. These transfer rates can outperform standard  Asynchronous 8 and 16-bit Parallel Flash memories.

Additionally, the device supports JEDEC standard manufacturer and device ID, and a 64-bit Unique Serial  Number and three 256-bytes Security Registers.


New Family of SpiFlash Memories  

– W25Q64JV: 64M-bit / 8M-byte

– Standard SPI: CLK, /CS, DI, DO 

– Dual SPI: CLK, /CS, IO0, IO1

– Quad SPI: CLK, /CS, IO0, IO1, IO2, IO

– Software & Hardware Reset

Highest Performance Serial Flash  

– 133MHz Single, Dual/Quad SPI clocks 266/532MHz equivalent Dual/Quad SPI 

– Min. 100K Program

-Erase cycles per sector

– More than 20-year data retention

Efficient “Continuous Read”

  – Continuous Read with 8/16/32/64

-Byte Wrap 

– As few as 8 clocks to address memory 

– Allows true XIP (execute in place) operation

– Outperforms X16 Parallel Flash 

Low Power, Wide Temperature Range 

– Single 2.7 to 3.6V supply

– <1µA Power-down (typ.) 

– -40°C to +85°C operating range

Flexible Architecture with 4KB sectors

– Uniform Sector/Block Erase (4K/32K/64K-Byte) 

– Program 1 to 256 byte per programmable page 

– Erase/Program Suspend & Resume 

Advanced Security Features

– Software and Hardware Write-Protect

– Special OTP protection

– Top/Bottom, Complement array protection

– Individual Block/Sector array protection 

– 64-Bit Unique ID for each device 

– Discoverable Parameters (SFDP) Register

– 3X256-Bytes Security Registers 

 – Volatile & Non-volatile Status Register Bits

Space Efficient Packaging 

– 8-pin SOIC 208-mil  

– 8-pad WSON 6x5-mm/8x6-mm

– 16-pin SOIC 300-mil 

– 24-ball TFBGA 8x6-mm (6x4 ball array) 

– 24-ball TFBGA 8x6-mm (6x4/5x5 ball array) 

– Contact Winbond for KGD and other options

Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Related Products
1.2V Serial NOR flash memory

Winbond 1.2V Serial NOR flash memory

Winbond 1.2V Serial NOR flash, the first flash memory to support ultra-low voltage operation.

Winbond Spi Flash Serial NOR Flash Memory

Winbond W25X/W25Q Spi Flash Serial NOR Flash Memory

Serial NOR Flash Spi Flash®Memories with SPI, Dual-SPI, Quad-SPI and QPI Part NO. W25Q64JVSSIQ,W25Q64JVSSJQ,W25Q64JVSSBQ,W25Q64JVSSAQ,W25Q64JVSSSQ

Winbond Serial NAND Flash semiconductor

Winbond Serial NAND Flash for code storage nand flash semiconductor

Winbond provides a series of Serial NAND products compatible with SPI NOR interface, so that users do not need to continue to rack their brains over the selection of large-capacity memory. In the past, NOR Flash has a relatively good cost advantage in low-volume products, but NAND Flash is a more cost-competitive product in large-volume products.

nor flash memory manufacturers

Compatible with industry standard Winbond SLC NAND Flash for network communication storage

Winbond offers a range of industry standard SLC NAND from 1Gb to 8Gb. In software and hardware control and interface, it is the same as all SLC NAND in the market. Therefore, users can easily find their own suitable products in the huabang product series to replace them.

winbond spi flash memory

Winbond SpiStack Flash memory combine homogeneous and heterogeneous memory in one package

*W25M SpiStack product series *Stack memory for various capacity combinations of Flash products *Users can easily choose the size of the required capacity *Standard SPI interface *Compatible with existing SpiFlash

Winbond W25Q128FWPIG


The W25Q128FW (128M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. 

3V 256Mbit Serial Flash Memory With

Winbond W25Q256JVEIQ 3V 256Mbit Serial Flash Memory With

DUAL/QUAD SPI For Industrial & Industrial Plus Grade The W25Q256JV supports standard SPI, Dual SPI and Quad SPI operation. Standard SPI instructions use the unidirectional DI (input) pin to serially write instructions, addresses or data to the device on the rising edge of the Serial Clock (CLK) input pin. Standard SPI also uses the unidirectional DO (output) to read data or status from the device on the falling edge of CLK.

3V 32M-BIT Serial Flash Memory With

Winbond W25Q32JVSSIQ 3V 32M-BIT Serial Flash Memory With

For Industrial & Industrial Plus Grade. The W25Q32JV supports Standard SPI, Dual SPI and Quad SPI operation in each individual stacked die.All 8-bit instructions are shifted into the device through DI (IO0) pin, address and data are shifted in and out of the device through either DI & DO pins for Standard SPI instructions, IO0 & IO1 pins for Dual SPI instructions, or IO0-IO3 pins for Quad SPI instructions.

Please tell us your needs

Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.

partners 8
Leave a message Request A Free Quote
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.