product
Products
Home /

SEMICONDUCTORS

/

Electronic Components

/

Winbond

/Winbond W25X10CLSNIG Memory IC

Winbond W25X10CLSNIG Memory IC

2.5 / 3 / 3.3 V  

1M-BIT

SERIAL FLASH MEMORY WITH  

4KB SECTORS AND DUAL I/O SPI

  • Brand:

    Winbond
  • Product Details

1. GENERAL DESCRIPTION

The W25X10CL (1M-bit) Serial Flash memories provide a storage solution for systems with limited  space, pins and power. The 25X series offers flexibility and performance well beyond ordinary Serial  Flash devices. They are ideal for code download applications as well as storing voice, text and data.  The devices operate on a single 2.3V to 3.6V power supply with current consumption as low as 1mA active and 1µA for power-down. All devices are offered in space-saving packages. 

 

The W25X10CL arrays are organized into 512 programmable pages of 256-bytes each. Up to 256  bytes can be programmed at a time. The W25X10CL have 32 erasable sectors, 4 erasable 32KB  blocks and 2 erasable 64KB blocks respectively. The small 4KB sectors allow for greater flexibility in  applications that require data and parameter storage. (See figure 2.) 


 The W25X10CL support the standard Serial Peripheral Interface (SPI), and a high performance dual  output as well as Dual I/O SPI: Serial Clock, Chip Select, Serial Data DI (I/O0), DO (I/O1). SPI clock  frequencies up to 104MHz are supported allowing equivalent clock rates of 208MHz when using the  Fast Read Dual Output instruction. These transfer rates are comparable to those of 8 and 16-bit  Parallel Flash memories. The Continuous Read Mode allows for efficient memory access with as few  as 16-clocks of instruction-overhead to read a 24-bit address, allowing true XIP (execute in place)  operation. 


A Hold pin, Write Protect pin and programmable write protect, with top or bottom array control  features, provide further control flexibility. Additionally, the device supports JEDEC standard  manufacturer and device identification with a 64-bit Unique Serial Number.


2. FEATURES


Family of Serial Flash Memories 

– W25X10CL: 1M-bit/128K-byte (131,072) 

– 256-bytes per programmable page

– Uniform erasable 4KB, 32KB & 64KB regions.

SPI with Single / Dual Outputs / I/O 

– Standard SPI: CLK, /CS, DI, DO, /WP, /Hold 

– Dual SPI: CLK, /CS, IO0, IO1, /WP, /Hold

Data Transfer up to 208M-bits / second 

– Clock operation to 104MHz – 208MHz equivalent Dual I/O SPI

– Auto-increment Read capability Efficient “Continuous Read Mode” 

– Low Instruction overhead – Continuous Read 

– As few as 16 clocks to address memory 

– Allows true XIP (execute in place) operation 

Software and Hardware Write Protection 

– Write-Protect all or portion of memory

– Enable/Disable protection with /WP pin

– Top or bottom array protection 

Flexible Architecture with 4KB sectors 

– Uniform Sector/Block Erase (4/32/64-kbytes)

– Page program up to 256 bytes <1ms 

– More than 100,000 erase/write cycles

– More than 20-year data retention 

Low Power, Wide Temperature Range 

 – Single 2.3V to 3.6V supply 

– 1mA active current, <1µA Power-down(typ.) 

– -40° to +85°C operating range 

Space Efficient Packaging 

– 8-pin SOIC

– 8-pad USON 2x3-mm – Contact Winbond for KGD and other options


Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Product Categories

New Products

Related Products
1.2V Serial NOR flash memory

Winbond 1.2V Serial NOR flash memory

Winbond 1.2V Serial NOR flash, the first flash memory to support ultra-low voltage operation.

Winbond Spi Flash Serial NOR Flash Memory

Winbond W25X/W25Q Spi Flash Serial NOR Flash Memory

Serial NOR Flash Spi Flash®Memories with SPI, Dual-SPI, Quad-SPI and QPI Part NO. W25Q64JVSSIQ,W25Q64JVSSJQ,W25Q64JVSSBQ,W25Q64JVSSAQ,W25Q64JVSSSQ

Winbond Serial NAND Flash semiconductor

Winbond Serial NAND Flash for code storage nand flash semiconductor

Winbond provides a series of Serial NAND products compatible with SPI NOR interface, so that users do not need to continue to rack their brains over the selection of large-capacity memory. In the past, NOR Flash has a relatively good cost advantage in low-volume products, but NAND Flash is a more cost-competitive product in large-volume products.

nor flash memory manufacturers

Compatible with industry standard Winbond SLC NAND Flash for network communication storage

Winbond offers a range of industry standard SLC NAND from 1Gb to 8Gb. In software and hardware control and interface, it is the same as all SLC NAND in the market. Therefore, users can easily find their own suitable products in the huabang product series to replace them.

winbond spi flash memory

Winbond SpiStack Flash memory combine homogeneous and heterogeneous memory in one package

*W25M SpiStack product series *Stack memory for various capacity combinations of Flash products *Users can easily choose the size of the required capacity *Standard SPI interface *Compatible with existing SpiFlash

Winbond W25Q128FWPIG

Winbond W25Q128FWPIG 1.8V 128M-BIT SERIAL FLASH MEMORY WITH

The W25Q128FW (128M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. 

3V 256Mbit Serial Flash Memory With

Winbond W25Q256JVEIQ 3V 256Mbit Serial Flash Memory With

DUAL/QUAD SPI For Industrial & Industrial Plus Grade The W25Q256JV supports standard SPI, Dual SPI and Quad SPI operation. Standard SPI instructions use the unidirectional DI (input) pin to serially write instructions, addresses or data to the device on the rising edge of the Serial Clock (CLK) input pin. Standard SPI also uses the unidirectional DO (output) to read data or status from the device on the falling edge of CLK.

3V 32M-BIT Serial Flash Memory With

Winbond W25Q32JVSSIQ 3V 32M-BIT Serial Flash Memory With

For Industrial & Industrial Plus Grade. The W25Q32JV supports Standard SPI, Dual SPI and Quad SPI operation in each individual stacked die.All 8-bit instructions are shifted into the device through DI (IO0) pin, address and data are shifted in and out of the device through either DI & DO pins for Standard SPI instructions, IO0 & IO1 pins for Dual SPI instructions, or IO0-IO3 pins for Quad SPI instructions.

Please tell us your needs

Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.

partners 8
Partners7
Partners6
Partners5
Partners4
Partners3
Partners2
Partners1
Leave a message Request A Free Quote
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.