Home /

Product Application

/Winbond W25Q16DWZPIG, W25Q16FWZPIG replace the old version with the new version W25Q16JWZPIQ

Winbond W25Q16DWZPIG, W25Q16FWZPIG replace the old version with the new version W25Q16JWZPIQ

December 16, 2020

Winbond W25Q16DWZPIG trades in new W25Q16FWZPIG, and even now there is an updated W25Q16JWZPIQ, the new version of the suffix Q means environmental protection, more in line with our conditions to use, Winbond agents, welcome to consult.


W25Q16JW 1.8V 16M-BITSERIAL FLASH MEMORY WITH DUAL, QUADSPIFor Industrial & Industrial Plus Grade


W25Q16JW (16Mbit) serial flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series provides flexibility and performance beyond ordinary serial flash memory devices. They are very suitable for mapping code to RAM, executing code directly from Dual / Quad SPI (XIP) and storing voice, text and data. The device operates with a power supply ranging from 1.65V to 1.95V, and the power consumption is as low as 0.1μA to achieve power-down. ...


W25Q16JWarray is divided into 8192 programmable pages, each with 256 bytes. Up to 256 bytes can be programmed at one time. The page can be erased in 16 groups (4KB sector erase), 128 groups (32KB block erase), 256 groups (64KB block erase) or the entire chip (chip erase).


W25Q16JW has 512 erasable sectors and 32 erasable blocks respectively. The smaller 4KB sector provides greater flexibility for applications that require data and parameter storage. ...


W25Q16JW supports standard serial peripheral interface (SPI), high-performance dual/quad output and dual/quad I/O SPI: serial clock, chip selection, serial data I/O0 (DI), I/O1 (DO) , I/O2 and I/O3. When using SPI to quickly read Quad I/O instructions, it supports SPI clock frequencies up to 133MHz, allowing the equivalent clock rate of Quad I/O to be 532MHz (133MHz x 4). These transfer rates can exceed standard asynchronous 8-bit and 16-bit parallel flash memory. ...


In addition, the device also supports JEDEC standard manufacturer and device ID and SFDP registers, a 64-bit serial number and three 256-byte security registers.


New Family of SpiFlash Memories 

–W25Q16JW: 16M-bit / 2M-byte 

–Standard SPI: CLK,/CS, DI, DO 

–Dual SPI:CLK,/CS, IO0, IO1, 

–Quad SPI:CLK,/CS, IO0, IO1, IO2, IO3 

–Software & Hardware Reset

(1) Highest Performance Serial Flash

 –133MHz QuadI/O SPI clocks 

–66MB/S continuous data transfer rate

 –Min. 100K Program-Erase cycles 

–More than 20-year data retention

 Low Power, Wide Temperature Range 

–Single1.65Vto 1.95V supply 

–<0.1μ A Power-down (typ.) 

–-40°C to +85°C operating range –-40°C to +105°C operating range Flexible Architecture with 4KB sectors –Uniform Sector/BlockErase (4K/32K/64K-Byte) 

–Program 1 to 256 byte per programmable page –Erase/Program Suspend & Resume

 Advanced Security Features

 –Software and Hardware Write-Protect –Special OTP protection

(2) –Top/Bottom, Complement array protection –Individual Block/Sector array protection 

–64-Bit Unique ID for each device 

–Discoverable Parameters (SFDP) Register 

–3X256-Bytes Security Registers 

–Volatile & Non-volatile Status Register Bits

 Space Efficient Packaging

 –8-pin SOIC 150/208-mil

 –8-pad USON 4x3-mm 

–8-pad WSON 6x5-mm/ XSON 2x3-mm

 –8-ball WLCSP –Contact Winbond for KGD and other options.

Please tell us your needs

Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.

partners 8
Partners7
Partners6
Partners5
Partners4
Partners3
Partners2
Partners1
Leave a message Request A Free Quote
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.