The TPS54531 device is a 28V, 5A non-synchronous step-down converter that integrates a low RDS(onhigh-side MOSFET.
Brand:
TIDescription
The TPS54531 device is a 28V, 5A non-synchronous step-down converter that integrates a low RDS(onhigh-side MOSFET. The device will automatically activate the pulse skip Eco-mode function at light load to improve efficiency. In addition, the 1μA shutdown supply current makes the device suitable for battery-powered applications. Current mode control with internal slope compensation simplifies external compensation calculations and reduces the number of components while allowing the use of ceramic output capacitors. A resistor divider sets the delay time of the input undervoltage lockout. The overvoltage transient protection circuit limits the voltage overshoot during startup and transients. The cycle-by-cycle current limit mechanism, frequency foldback, and thermal shutdown feature protect the device and load under overload conditions. The TPS54531 device adopts an 8-pin SO PowerPADTM package, which has been optimized internally to improve the heat dissipation performance.
Characteristics
• Input voltage range: 3.5V to 28V
• Adjustable output voltage as low as 0.8V
• Integrated 80mΩ high-side metal oxide semiconductor field effect transistor (MOSFET) supports continuous output voltage up to 5A
• High efficiency Ecomode™ on light load conditions with pulse skipping
• 570kHz fixed switching frequency
• Typical turn-off quiescent current of 1μA
• Adjustable slow start can limit inrush current
• Programmable undervoltage lockout (UVLO) threshold
• Overvoltage transient protection
• Cycle-by-cycle current limit, frequency foldback and thermal shutdown protection
• Available in an easy-to-use thermally enhanced 8-pin SO PowerPADTM package
Application
• Consumer applications, such as set-top boxes, CPE devices, LCD displays, peripherals, and battery chargers
• Industrial and car audio power supply
• 5V, 12V and 24V distributed power system
The LM3xxLV family includes the single LM321LV, dual LM358LV, and quad LM324LV operational amplifiers, or op amps. The devices operate from a low voltage of 2.7 V to 5.5 V.
TCA9534A is a 16-pin device that provides 8-bit general-purpose parallel input and output (I/O) expansion for the two-wire bidirectional I 2C bus (or SMBus) protocol. The device can operate in a supply voltage range of 1.65V to 5.5V, allowing the use of various devices. The device supports 100kHz (standard mode) and 400kHz (fast mode) clock frequencies. When switches, sensors, buttons, LEDs, fans, and other similar devices require additional I/O, I/O expanders (such as TCA9534A) can provide a simple solution.
The TLC5941 is a 16-channel, constant-current sink, LED driver. Each channel has an individually adjustable 4096-step grayscale PWM brightness variations between LED channels and other LED Controlled In-Rush Current drivers. Both grayscale control and dot correction are accessible via a serial interface. A single external resistor sets the maximum current value of all 16 channels.
The TPS6104x is a high-frequency boost converter dedicated for small to medium LCD bias supply and white LED backlight supplies. The device is ideal to generate output voltages up to 28 V from a dual-cell NiMH/NiCd or a single-cell Li-Ion battery. The part can also be used to generate standard 3.3-V or 5-V to 12-V power conversions.
The TL431 and TL432 are three-terminal adjustable shunt regulators, with specified thermal stability over applicable automotive, commercial, and military temperature ranges.
8-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROLThe TLC548 and TLC549 are CMOS analog-to-digital converter (ADC) integrated circuits built around an 8-bitswitched-capacitor successive-approximation ADC. These devices are designed for serial interface with amicroprocessor or peripheral through a 3-state data output and an analog input. The TLC548 and TLC549 useonly the input/output clock (I/O CLOCK) input along with the chip select (CS) input for data control. Themaximum I/O CLOCK input frequency of the TLC548 is 2.048 MHz, and the I/O CLOCK input frequency of theTLC549 is specified up to 1.1 MHz.
Description This device contains four independent buffers with 3-state outputs. Each gate performs the Boolean function Y = A in positive logic.
The TMP102 device is a digital temperature sensor, which is very suitable as a replacement for NTC/PTC thermistors that require high precision. The device can provide an accuracy of ±0.5°C without calibration or without external component signal conditioning. The device temperature sensor is a highly linear product, and the temperature can be known without complicated calculations or table lookup. The on-chip 12-bit ADC has a minimum resolution of 0.0625°C.
Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.
IPv6 network supported