ST STM8S005K6T6C 16 MHz STM8S 8-bit MCU 32 Kbytes Flash

Description

The STM8S005xx value line 8-bit microcontrollers offer 32 Kbytes of Flash programmemory,plus 128 bytesof data EEPROM.They are referred to as medium-density devices in the STM8S microcontroller family reference manual(RM0016).All devicesof the STM8S005xx value line provide the following benefits:performance,robustness,reduced system cost,and short develoment cycles.

Device performance and robustness are ensured by true data EEPROM supportingup to 100000 write/erasecycles,advanced core and peripherals madein a state-of-theart technology,a 16 MHz clock frequency, robustI/Os,independent watchdogs with separate clock source,and a clock security system .

The systemcost is reduced thanks to high system integration level with internal clockoscillators,watchdog and brown-out reset.

Common family product architecture with compatible pinout,memory map and modular peripherals allow application scalability and reduced development cycles.

All products operate from a 2.95 to 5.5 V supply voltage.

Full documentationis offered as well as a wide choice of development tools.

Features

Core

•16 MHz advanced STM8core with Harvard architecture and 3-stagepipe line

•Extended instruction set Memories

•Medium-densityFlash/EEPROM:

-Program memory:32 Kbytesof Flash memory;data retention20 years at 55°Cafter 100 cycles

-Datamemory:128 bytesof true data EEPROM;endurance up to 100 k write/erasecycles

•RAM:2 Kbytes

Clock,resetand supply management

•2.95 V to 5.5 V operating voltage

•Flexible clock control,4 master clock sources:

-Low power crystal resonator oscillator

-External clock input

-Internal,user-trimmable 16 MHz RC

-Internal low power 128 kHz RC

•Clock security system with clockmonitor

•Power management:-Low power modes(wait,active-halt,halt)

-Switch-off peripheral clocks individually

•Permanently active,low consumption power-onand power-down reset

Interrupt management

•Nested interrupt controller with 32 interrupts

•Up to 37 external interruptson 6 vectors

Timers

•2x 16-bit general purpose timers,with 2+3CAPCOM channels(IC, OC or PWM)

•Advanced control timer:16-bit,4 CAPCOM  channels,3 complement aryoutputs,dead-timeinsertionand flexible synchronization

•8-bit basic timer with 8-bit prescaler

•Auto wake-uptimer

•Windowand independent watchdog timers 

Communicationsinterfaces

•UART with clockoutput for synchronous operation,Smartcard,IrDA,LIN

•SPI interfaceup to 8 Mbit/s

•I2C interfaceup to 400 Kbit/s 

Analog-to-digitalconverter(ADC)

•10-bit,±1 LSB ADC with up to 10 multiplexed channels,scanmode and analog watchdog 

I/Os

•Up to 38 I/Os on a 48-pin package including 16 high sink outputs

•Highlyrobust I/O design,immune against current injection

Development support

•Embedded single wire interface module(SWIM)for fast on-chip programming and non intrusive debugging