ST MUC STM32F030C6T6 LQFP-48

Features 

 • Core: ARM® 32-bit Cortex®

-M0 CPU,  frequency up to 48 MHz  

• Memories  

– 16 to 256 Kbytes of Flash memory  

– 4 to 32 Kbytes of SRAM with HW parity  

• CRC calculation unit  

• Reset and power management  

– Digital & I/Os supply: VDD = 2.4 V to 3.6 V  

– Analog supply: VDDA = VDD to 3.6 V  

– Power-on/Power down reset (POR/PDR)  

– Low power modes: Sleep, Stop, Standby  

• Clock management  

– 4 to 32 MHz crystal oscillator  

– 32 kHz oscillator for RTC with calibration 

– Internal 8 MHz RC with x6 PLL option  

– Internal 40 kHz RC oscillator  

• Up to 55 fast I/Os  

– All mappable on external interrupt vectors  

– Up to 55 I/Os with 5V tolerant capability  

• 5-channel DMA controller  

• One 12-bit, 1.0 μs ADC (up to 16 channels)  

– Conversion range: 0 to 3.6 V  

– Separate analog supply: 2.4 V to 3.6 V  

• Calendar RTC with alarm and periodic wakeup  from Stop/Standby  

• 11 timers  

– One 16-bit advanced-control timer for  six-channel PWM output  

– Up to seven 16-bit timers, with up to four  IC/OC, OCN, usable for IR control  decoding  – Independent and system watchdog timers  

– SysTick timer

• Communication interfaces  

– Up to two I2C interfaces  

– one supporting Fast Mode Plus  (1 Mbit/s) with 20 mA current sink,  

– one supporting SMBus/PMBus.  

– Up to six USARTs supporting master  synchronous SPI and modem control; one  with auto baud rate detection  

– Up to two SPIs (18 Mbit/s) with 4 to 16  programmable bit frames  

• Serial wire debug (SWD)  

• All packages ECOPACK®2