product
Products
Home /

Electronic Components

/

ST

/ST MCU STM32F103RFT6 LQFP-64

ST MCU STM32F103RFT6 LQFP-64

XL-density performance line ARM-based 32-bit MCU with 768 KB to  1 MB Flash, USB, CAN, 17 timers, 3 ADCs, 13 communication interfaces

  • Brand:

    ST
  • Product Details

Features  

■ Core: ARM 32-bit Cortex™-M3 CPU with MPU  

– 72 MHz maximum frequency,  1.25 DMIPS/MHz (Dhrystone 2.1)  performance at 0 wait state memory  access  

– Single-cycle multiplication and hardware  division  

■ Memories  

– 768 Kbytes to 1 Mbyte of Flash memory  

– 96 Kbytes of SRAM  

– Flexible static memory controller with 4  Chip Select. Supports Compact Flash,  SRAM, PSRAM, NOR and NAND memories  

– LCD parallel interface, 8080/6800 modes  

■ Clock, reset and supply management  

– 2.0 to 3.6 V application supply and I/Os  

– POR, PDR, and programmable voltage  detector (PVD)  

– 4-to-16 MHz crystal oscillator  

– Internal 8 MHz factory-trimmed RC  

– Internal 40 kHz RC with calibration  

– 32 kHz oscillator for RTC with calibration  

■ Low power  

– Sleep, Stop and Standby modes  

– VBAT supply for RTC and backup registers  

■ 3 × 12-bit, 1 µs A/D converters (up to 21  channels)  

– Conversion range: 0 to 3.6 V  

– Triple-sample and hold capability  

– Temperature sensor  

■ 2 × 12-bit D/A converters  

■ DMA: 12-channel DMA controller  

– Supported peripherals: timers, ADCs, DAC,  SDIO, I2Ss, SPIs, I2Cs and USARTs  

■ Debug mode  

– Serial wire debug (SWD) & JTAG interfaces  

– Cortex-M3 Embedded Trace Macrocell™

■ Up to 112 fast I/O ports  

– 51/80/112 I/Os, all mappable on 16  external interrupt vectors and almost all  5 V-tolerant  

■ Up to 17 timers  

– Up to ten 16-bit timers, each with up to 4  IC/OC/PWM or pulse counter and  quadrature (incremental) encoder input  

– 2 × 16-bit motor control PWM timers with  dead-time generation and emergency stop  

– 2 × watchdog timers (Independent and  Window)  

– SysTick timer: a 24-bit downcounter  

– 2 × 16-bit basic timers to drive the DAC  

■ Up to 13 communication interfaces  

– Up to 2 × I2C interfaces (SMBus/PMBus)  

– Up to 5 USARTs (ISO 7816 interface, LIN,  IrDA capability, modem control)  

– Up to 3 SPIs (18 Mbit/s), 2 with I2S  interface multiplexed  

– CAN interface (2.0B Active)  – USB 2.0 full speed interface  

– SDIO interface  

■ CRC calculation unit, 96-bit unique ID  

■ ECOPACK® packages

Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Related Products
ST MCU STM32F030C8T6

ST MCU STM32F030C8T6 LQFP-48

Value-line ARM-based 32-bit MCU with 16 to 64-KB Flash, timers,  ADC, communication interfaces, 2.4-3.6 V operation.

STM32F051C8T6

ST MCU STM32F051C8T6

Low- and medium-density advanced ARM™-based 32-bit MCU with  16 to 64 Kbytes Flash, timers, ADC, DAC and comm. interfaces

ST STM32F107VCT6

ST LQFP-100 MCU STM32F107VCT6

The STM32F105xx and STM32F107xx connectivity line family incorporates the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 256 Kbytes and SRAM 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, four general-purpose 16-bit timers plus a PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, five USARTs, an USB OTG FS and two CANs. Ethernet is available on the STM32F107xx only. The STM32F105xx and STM32F107xx connectivity line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

 ST STM32F103VBT6

MCU ST STM32F103VBT6 100P LQFP-100_14x14

Medium-density performance line ARM-based 32-bit MCU with 64  or 128 KB Flash, USB, CAN, 7 timers, 2 ADCs, 9 com. interfaces

ST MUC STM32F030C6T6

ST MUC STM32F030C6T6 LQFP-48

Value-line ARM®-based 32-bit MCU with up to 256-KB Flash,  timers, ADC, communication interfaces, 2.4-3.6 V operation

ST MCU STM32F051C8T6

ST MCU STM32F051C8T6 LQFP-48

Low- and medium-density advanced ARM™-based 32-bit MCU with  16 to 64 Kbytes Flash, timers, ADC, DAC and comm. interfaces

ST MCU STM32F051C8T6

ST MCU STM8S103K3T6C LQFP-32

Low- and medium-density advanced ARM™-based 32-bit MCU with  16 to 64 Kbytes Flash, timers, ADC, DAC and comm. interfaces

ST MCU STM32F051C8T6

ST MCU STM8S207C8T6 LQFP-48

Performance line, 24 MHz STM8S 8-bit MCU, up to 128 KB Flash,  integrated EEPROM, 10-bit ADC, timers, 2 UARTs, SPI, I²C, CAN

Please tell us your needs

Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.

partners 8
Partners7
Partners6
Partners5
Partners4
Partners3
Partners2
Partners1
Leave a message Request A Free Quote
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.