ST MCU STM32F030C8T6 LQFP-48

Features  

 Core: ARM® 32-bit Cortex™

-M0 CPU,  frequency up to 48 MHz  

 Memories  

– 16 to 64 Kbytes of Flash memory  

– 4 to 8 Kbytes of SRAM with HW parity  checking  

 CRC calculation unit  

 Reset and power management  

– Voltage range: 2.4 V to 3.6 V  

– Power-on/Power down reset (POR/PDR)  

– Low power modes: Sleep, Stop, Standby  

 Clock management  

– 4 to 32 MHz crystal oscillator  

– 32 kHz oscillator for RTC with calibration  

– Internal 8 MHz RC with x6 PLL option  

– Internal 40 kHz RC oscillator  

 Up to 55 fast I/Os  

– All mappable on external interrupt vectors  

– Up to 36 I/Os with 5 V tolerant capability  

 5-channel DMA controller  

 1 x 12-bit, 1.0 µs ADC (up to 16 channels)  

– Conversion range: 0 to 3.6 V  

– Separate analog supply from 2.4 up to  3.6 V  

 Up to 10 timers  

– One 16-bit 7-channel advanced-control  timer for 6 channels PWM output, with  deadtime generation and emergency stop  

– One 16-bit timer, with up to 4 IC/OC, usable  for IR control decoding  

– One 16-bit timer, with 2 IC/OC, 1 OCN,  deadtime generation and emergency stop  

– Two 16-bit timers, each with IC/OC and  OCN, deadtime generation, emergency  stop and modulator gate for IR control  

– One 16-bit timer with 1 IC/OC

– One 16-bit basic timer  

– Independent and system watchdog timers  

– SysTick timer: 24-bit downcounter  

 Calendar RTC with alarm and periodic wakeup  from Stop/Standby  

 Communication interfaces  

– Up to two I2C interfaces: one supporting  Fast Mode Plus (1 Mbit/s) with 20 mA  current sink  – Up to two USARTs supporting master  synchronous SPI and modem control; one  with auto baud rate detection  

– Up to two SPIs (18 Mbit/s) with 4 to 16  programmable bit frame  

 Serial wire debug (SWD)