*Smart H.265/H.264 encoding engine, full real-time performance *Starlight-level ISP, multiple noise reduction *HD resolution,5M/4M/3M/2M/1M simultaneous support *Ultra low power consumption, minimum 300MW *Support microphone arrays, activate audio and video applications *Built-in vector acceleration engine to support end-level lightweight AI applications *CPU operating at 1.0GHZ,base on MIPS *64KB L1-Cache/128KB L2-Cache *MXU2.0 (SIMD128) *Video and audio intelligent analysis *High Level ISP, Support AE, AWB, AF, 3D De-noise, WDR, DRC *Smart H.265, high profile, maximum 2688x2048 resolution *Internal integration 64MB/128MB DDR2 *Typecal Power: 500mW including DDR (1080P@25fps H.265) *Fast boot and quick stream

*Professional image signal process and H.264 encoding(960P) *High performance CPU with intelligent analysis (>1G CPU, 128Bits SIMD engine) *Lowest power consumer in IPC market (typical running power: 390mw including DDRII ) *CPU operating at 1.0Ghz, base on MIPS *128KB L2-cache *MXU2.0 (SIMD128) *Video and audio intelligent analysis *High Level ISP, support 3D denoise, WDR *H.264 baseline, mainprofile, up to 960P resolution *Package with 64MB DDR2 *Low to less than 400mw power consumption including DDRII in working time

*Smart H.265/H.264 encoding engine, full real-time performance *Starlight-level ISP, multiple noise reduction *HD resolution,5M/4M/3M/2M/1M simultaneous support *Ultra low power consumption, minimum 300MW *Support microphone arrays, activate audio and video applications *Built-in vector acceleration engine to support end-level lightweight AI applications *CPU operating at 1.0GHZ,base on MIPS *64KB L1-Cache/128KB L2-Cache *MXU2.0 (SIMD128) *Video and audio intelligent analysis *High Level ISP, Support AE, AWB, AF, 3D De-noise, WDR, DRC *Smart H.265, high profile, maximum 2688x2048 resolution *Internal integration 64MB/128MB DDR2 *Typecal Power: 500mW including DDR (1080P@25fps H.265) *Fast boot and quick stream

The BY25Q40A is 4M-bit Serial Peripheral Interface(SPI) Flash memory, and supports the  Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (/WP), and I/O3  (/HOLD). The Dual I/O data is transferred with speed of 216Mbits/s and the Quad I/O & Quad output  data is transferred with speed of 432Mbits/s. The device uses a single low voltage power supply,  ranging from 2.7 Volt to 3.6 Volt. Additionally, the device supports JEDEC standard manufacturer and device ID and three 256-bytes  Security Registers. In order to meet environmental requirements, Boya Microelectronics offers an 8-pin SOP 150-mil,  or 208mil, an 8-pin TSSOP 173-mil, an 8-pad USON 3x2-mm, and other special order packages,  please contacts Boya Microelectronics for ordering information.