product
Products
Home /

Products

  • MXIC FLASH MEMORY MX25L12835EMI-10G

    MXIC FLASH MEMORY MX25L12835EMI-10G SOP-16

    HIGH PERFORMANCE  SERIAL FLASH SPECIFICATION128M-BIT [x 1/x 2/x 4] CMOS MXSMIOTM (SERIAL MULTI I/O) FLASH MEMORY

    Hot Tags : MX25L12835EMI-10G MXIC FLASH MEMORY FLASH MEMORY SERIAL FLASH

  •  MX25L6406EM2I-12G

    MXIC FLASH MEMORY MX25L6406EM2I-12G SOIC-8_208mil

    GENERAL DESCRIPTION  The device feature a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus.  The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access  to the device is enabled by CS# input.  When it is in Dual Output read mode, the SI and SO pins become SIO0 and SIO1 pins for data output.  The device provides sequential read operation on whole chip.  After program/erase command is issued, auto program/ erase algorithms which program/ erase and verify the specified page or sector/block locations will be executed. Program command is executed on byte basis, or page basis, or  word basis for erase command is executes on sector, or block, or whole chip basis.  To provide user with ease of interface, a status register is included to indicate the status of the chip. The status read  command can be issued to detect completion status of a program or erase operation via WIP bit.  Advanced security features enhance the protection and security functions, please see security features section for  more details.  When the device is not in operation and CS# is high, it is put in standby mode.  The device utilizes Macronix's proprietary memory cell, which reliably stores memory contents even after typical  100,000 program and erase cycles.

    Hot Tags : MEMORY MX25L6406EM2I-12G FLASH

  • MX25L3206EM2I-12G

    MXIC FLASH MEMORY MX25L3206EM2I-12G SOP-8

    32M-BIT [x 1 / x 2] CMOS SERIAL FLASHGENERAL DESCRIPTION  The device feature a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus.  The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access  to the device is enabled by CS# input.  When it is in Dual Output read mode, the SI and SO pins become SIO0 and SIO1 pins for data output.  The device provides sequential read operation on whole chip.  After program/erase command is issued, auto program/erase algorithms which program/erase and verify the specified page or sector/block locations will be executed. Program command is executed on byte basis, or page basis, or  word basis for erase command is executes on sector, or block, or whole chip basis.  To provide user with ease of interface, a status register is included to indicate the status of the chip. The status read  command can be issued to detect completion status of a program or erase operation via WIP bit.  Advanced security features enhance the protection and security functions, please see security features section for  more details.  When the device is not in operation and CS# is high, it is put in standby mode.  The device utilizes Macronix's proprietary memory cell, which reliably stores memory contents even after typical  100,000 program and erase cycles.

    Hot Tags : MXIC

  • MX25L1606EM2I-12G

    MXIC FLASH MEMORY MX25L1606EM2I-12G SOIC-8_208mil

    3V, 16M-BIT [x 1/x 2]  CMOS SERIAL FLASH MEMORYKey Features  • Hold Feature  • Low Power Consumption  • Auto Erase and Auto Program Algorithms  • Additional 512 bit secured OTP for unique identifier

    Hot Tags : MX25L1606EM2I-12G

  • EMST M12L64164A-7TG2C

    EMST TOSP-54 M12L64164A-7TG2C SDRAM MEMORY

    1M x 16 Bit x 4 Banks   Synchronous DRAMThe M12L64164A is 67,108,864 bits synchronous high data rate Dynamic RAM organized as 4 x 1,048,576 words by 16 bits.  Synchronous design allows precise cycle controls with the use of system clock I/O transactions are possible on every clock  cycle. Range of operating frequencies, programmable burst length and programmable latencies allow the same device to be  useful for a variety of high bandwidth, high performance memory system applications.

    Hot Tags : EMST M12L64164A-7TG2C SDRAM MEMORY

  • ST MCU STM32F030C8T6

    ST MCU STM32F030C8T6 LQFP-48

    Value-line ARM-based 32-bit MCU with 16 to 64-KB Flash, timers,  ADC, communication interfaces, 2.4-3.6 V operation.

    Hot Tags : STM32F030C8T6 ST MCU ST MCU

  • ST MCU STM32F103RFT6

    ST MCU STM32F103RFT6 LQFP-64

    XL-density performance line ARM-based 32-bit MCU with 768 KB to  1 MB Flash, USB, CAN, 17 timers, 3 ADCs, 13 communication interfaces

    Hot Tags : STM32F103RFT6

  • ST MCU STM32F051C8T6

    ST MCU STM8S207C8T6 LQFP-48

    Performance line, 24 MHz STM8S 8-bit MCU, up to 128 KB Flash,  integrated EEPROM, 10-bit ADC, timers, 2 UARTs, SPI, I²C, CAN

    Hot Tags : ST MCU STM8S207C8T6 STM8S207C8T6

  • ST MCU STM32F051C8T6

    ST MCU STM8S103K3T6C LQFP-32

    Low- and medium-density advanced ARM™-based 32-bit MCU with  16 to 64 Kbytes Flash, timers, ADC, DAC and comm. interfaces

    Hot Tags : STM32F051C8T6 ST MCU STM8S103K3T6C

  • 38 infrared module

    38 infrared module for smart security cameras CKD SKD OEM ODM solutions

    We can provide Vcast 38 infrared module for smart security cameras CKD SKD OEM ODM solutionsIn order to better serve the security manufacturers, our company has devoloped the standard 38mm*38mm network module, simple and convenient, high-speed production, easy to assemble into various types of shell whole machine; Support for switching filters, compatible with the market mainstream lamp board; Free to provide NVS unified client, video/preview/playback, free to provide p2p mobile client and computer client remote monitoring; It supports onvif protocol, and can be compatible with most NVR manufacturers in the market through onvif protocol. If we use the NVR can also achieve plug and play and one-button function.

    Hot Tags : 38 infrared module smart security cameras CKD 3MP 38*38 Network Infrared module

  • ST MCU STM32F051C8T6

    ST MCU STM32F051C8T6 LQFP-48

    Low- and medium-density advanced ARM™-based 32-bit MCU with  16 to 64 Kbytes Flash, timers, ADC, DAC and comm. interfaces

    Hot Tags : ST MCU STM32F051C8T6

  • ST MUC STM32F030C6T6

    ST MUC STM32F030C6T6 LQFP-48

    Value-line ARM®-based 32-bit MCU with up to 256-KB Flash,  timers, ADC, communication interfaces, 2.4-3.6 V operation

    Hot Tags : ST MUC STM32F030C6T6 MUC STM32F030C6T6 ST STM32F030C6T6

<< 1 2 3 4 5 ... 16 >>
[  a total of  16  pages]

Please tell us your needs

Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.

partners 8
Partners7
Partners6
Partners5
Partners4
Partners3
Partners2
Partners1
Leave a message Request A Free Quote
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.