product
Products
Home /

Electronic Components

/

MXIC

/MXIC FLASH MEMORY MX25L3206EM2I-12G SOP-8

MXIC FLASH MEMORY MX25L3206EM2I-12G SOP-8

32M-BIT [x 1 / x 2] CMOS SERIAL FLASH

GENERAL DESCRIPTION  

The device feature a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus.  The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access  to the device is enabled by CS# input.  

When it is in Dual Output read mode, the SI and SO pins become SIO0 and SIO1 pins for data output.  

The device provides sequential read operation on whole chip.  

After program/erase command is issued, auto program/erase algorithms which program/erase and verify the specified page or sector/block locations will be executed. Program command is executed on byte basis, or page basis, or  word basis for erase command is executes on sector, or block, or whole chip basis.  

To provide user with ease of interface, a status register is included to indicate the status of the chip. The status read  command can be issued to detect completion status of a program or erase operation via WIP bit.  

Advanced security features enhance the protection and security functions, please see security features section for  more details.  When the device is not in operation and CS# is high, it is put in standby mode.  

The device utilizes Macronix's proprietary memory cell, which reliably stores memory contents even after typical  100,000 program and erase cycles.

  • Brand:

    MXIC
  • Product Details

FEATURES  

GENERAL  

• Single Power Supply Operation   

- 2.7 to 3.6 volt for read, erase, and program operations  

• Serial Peripheral Interface compatible 

-- Mode 0 and Mode 3  

• 33,554,432 x 1 bit structure or 16,777,216 x 2 bits (Dual Output mode) structure  

• 1024 Equal Sectors with 4K byte each  

- Any Sector can be erased individually  

• 64 Equal Blocks with 64K byte each  

- Any Block can be erased individually  

• Program Capability   

- Byte base  

- Page base (256 bytes)  

• Latch-up protected to 100mA from -1V to Vcc +1V


PERFORMANCE  

• High Performance  

- Fast access time: 86MHz serial clock  

- Serial clock of Dual Output mode : 80MHz  

- Fast program time: 0.6ms(typ.) and 3ms(max.)/page  

- Byte program time: 9us (typical)  

- Fast erase time: 40ms(typ.) /sector ; 0.4s(typ.) /block  

• Low Power Consumption   

- Low active read current: 25mA(max.) at 86MHz   

- Low active programming current: 15mA (typ.)  

 - Low active sector erase current: 9mA (typ.)   

- Standby current: 15uA (max.) 

- Deep power-down mode 2uA (typical)  

• Typical 100,000 erase/program cycles  

• 20 years of data retention


SOFTWARE FEATURES  

• Input Data Format   

- 1-byte Command code  

• Advanced Security Features  

- Block lock protection  The BP3~BP0 status bit defines the size of the area to be software protection against program and erase instructions  

- Additional 512 bits secured OTP for unique identifier  

• Auto Erase and Auto Program Algorithm   

- Automatically erases and verifies data at selected sector   

- Automatically programs and verifies data at selected page by an internal algorithm that automatically times the  program pulse widths (Any page to be programed should have page in the erased state first)

• Status Register Feature  

• Electronic Identification   

- JEDEC 1-byte manufacturer ID and 2-byte device ID  

- RES command for 1-byte Device ID  

- REMS command for 1-byte manufacturer ID and 1-byte device ID  

• Support Serial Flash Discoverable Parameters (SFDP) mode  HARDWARE FEATURES  

• PACKAGE  

- 16-pin SOP (300mil)  

- 8-pin SOP (200mil)  

- 8-pin PDIP (300mil)  

- 8-land WSON (6x5mm)  

- 8-land USON (4x4mm)  

- 24-Ball BGA  

- All devices are RoHS Compliant and Halogen-free

Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Related Products
MXIC FLASH MEMORY MX25L12835EMI-10G

MXIC FLASH MEMORY MX25L12835EMI-10G SOP-16

HIGH PERFORMANCE  SERIAL FLASH SPECIFICATION128M-BIT [x 1/x 2/x 4] CMOS MXSMIOTM (SERIAL MULTI I/O) FLASH MEMORY

 MX25L6406EM2I-12G

MXIC FLASH MEMORY MX25L6406EM2I-12G SOIC-8_208mil

GENERAL DESCRIPTION  The device feature a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus.  The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access  to the device is enabled by CS# input.  When it is in Dual Output read mode, the SI and SO pins become SIO0 and SIO1 pins for data output.  The device provides sequential read operation on whole chip.  After program/erase command is issued, auto program/ erase algorithms which program/ erase and verify the specified page or sector/block locations will be executed. Program command is executed on byte basis, or page basis, or  word basis for erase command is executes on sector, or block, or whole chip basis.  To provide user with ease of interface, a status register is included to indicate the status of the chip. The status read  command can be issued to detect completion status of a program or erase operation via WIP bit.  Advanced security features enhance the protection and security functions, please see security features section for  more details.  When the device is not in operation and CS# is high, it is put in standby mode.  The device utilizes Macronix's proprietary memory cell, which reliably stores memory contents even after typical  100,000 program and erase cycles.

MX25L1606EM2I-12G

MXIC FLASH MEMORY MX25L1606EM2I-12G SOIC-8_208mil

3V, 16M-BIT [x 1/x 2]  CMOS SERIAL FLASH MEMORYKey Features  • Hold Feature  • Low Power Consumption  • Auto Erase and Auto Program Algorithms  • Additional 512 bit secured OTP for unique identifier

MXIC FLASH MEMORY MX25L12835FM2I-10G SOP8

MXIC FLASH MEMORY MX25L12835FM2I-10G SOP8

3V, 128M-BIT [x 1/x 2/x 4]  CMOS MXSMIO®   (SERIAL MULTI I/O)  FLASH MEMORY

ST MCU STM32F051C8T6

ST MCU STM8S103K3T6C LQFP-32

Low- and medium-density advanced ARM™-based 32-bit MCU with  16 to 64 Kbytes Flash, timers, ADC, DAC and comm. interfaces

TV CKD SKD LED Panel plastic metal cabinet

Factory OEM High Quality Smart LCD LED Television Backlight 32inch DLED TV professional CKD/SKD solution available

*31.5inch/32inch overall CKD and SKD solution with high performance *Model No.: 315S03 *OD35 *High quality cabinet, plastic housing and metal back plate, CKD and SKD both can do *Different optical solutions could be optional to meet your actual requirements *All Electronic materials, Ingredients and Screws both can be customerized

led tv LVDS wire

OEM Customized LCD Screen LVDS Cable IPEX Display Cable FFC Turn LVDS Wire

LVDS cableLow-Voltage Differential Signaling (LVDS) is a technology addressing the needs of today's high performance data transmission applications. LVDS is a low voltage differential signaling system which is an electrical system and can run at very high speeds over inexpensive, twisted-pair, stranded copper cables.

Winbond W9864G6KH-6

Winbond W9864G6KH-6 1M  4 BANKS  16 BITS SDRAM

W9864G6KH is a high-speed synchronous dynamic random access memory (SDRAM), organized as  1M words  4 banks  16 bits. W9864G6KH delivers a data bandwidth of up to 200M words per  second. For different application, W9864G6KH is sorted into the following speed grades: -5, -6, -6I and  -7. The -5 parts can run up to 200MHz/CL3. The -6 and -6I parts can run up to 166MHz/CL3 (the -6I  industrial grade which is guaranteed to support -40°C ~ 85°C). The -7 parts can run up to 143MHz/CL3  and with tRP = 18nS.

Please tell us your needs

Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.

partners 8
Partners7
Partners6
Partners5
Partners4
Partners3
Partners2
Partners1
Leave a message Request A Free Quote
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.