• Professional video analysis AI coprocessor
• High performance face/ up-body/ humanoid detection
• Stable intrusion alarm, passenger flow statistics, face capture, face recognition and other AI applications
• Extremely low running power consumption
Brand:
Ingenic
Products Description:
Ingenic has been designing MIPS based SoCs using their Xburst processor engine for several years, which are found in tablets, development boards, and wearables. The company has now launched T10 smart video processor based on the same MIPS32 processor but mobile camera, security survey, video talking, video analysis and so on with image resolution up to 1280×960 (datasheet says 1280×1024), and videos up to 720p30 or VGA @ 30fps
Products Specifications:
| CPU |
XBurst®-1 core 600MHZ/1GHZ – XBurst® RISC instruction set – XBurst® SIMD128 instruction set – XBurst® FPU instruction set supporting both single and double floating point format which are IEEE754 compatible – XBurst® 9-stage pipeline micro-architecture, the operating frequency is 800MHz |
| Memory | Integrated DDR |
| Spirit engine |
More than 10 people realtime multi-detection. Max input resolution 2048x2048 @60fps. |
| Video input/output |
Video input – DVP Input data format: YUV422, RGB565, RGB555, RAW8, RAW10, RAW12. – BT656/BT1120 – MIPI CSI2 IN (Ingenic Host Soc Only) Video output – MIPI CSI2 OUT (Ingenic Host Soc Only) |
| Result output |
Synchronous serial slave interfaces (SSI_SLV) – 3 protocols support: Motorola’s SPI, TI’s SSP and National’s Microwire – Full-duplex, transmit-only or receive-only operation for Motorola’s SPI and TI’s SSP – Half-duplex, transmit-only or receive-only operation for National’s Microwire USB 2.0 interface – Complies with the USB 2.0 standard for high-speed (480 Mbps) functions and with the On-The-Go supplement to the USB 2.0 specification – Operates either as the function controller of a high- /full-speed USB peripheral or as the host/peripheral in point-to-point or multi-point communications with other USB functions – 16 Endpoints: – Dedicate FIFO – Supports control, interrupt, ISO and bulk transfer |
*Professional level imaging ISP, night vision enhancement *Smart H.264 coding engine, ultra low code flow control *Extreme BOM cost control *Leading low power technology *Built-in Ethernet PHY
• Ultra-small and low-cost IoT module (26 * 37 * 3 mm) • Powered by Ingenic X1000E processor，up to 1.0 GHz • Supports 64MB LPDDR (built-in X1000E)，32MB SPI Flash (compatible with SPI NAND) • Supports Wi-Fi 2.4GHz IEEE 802.11 b/g/n • Supports Bluetooth 4.1 and Bluetooth Low Energy • Supports Ethernet, Display, Digital and Analog MIC, Camera, SD card, USB 2.0 OTG etc.
*Smart H.265/H.264 encoding engine, full real-time performance *Starlight-level ISP, multiple noise reduction *HD resolution,5M/4M/3M/2M/1M simultaneous support *Ultra low power consumption, minimum 300MW *Support microphone arrays, activate audio and video applications *Built-in vector acceleration engine to support end-level lightweight AI applications *CPU operating at 1.0GHZ,base on MIPS *64KB L1-Cache/128KB L2-Cache *MXU2.0 (SIMD128) *Video and audio intelligent analysis *High Level ISP, Support AE, AWB, AF, 3D De-noise, WDR, DRC *Smart H.265, high profile, maximum 2688x2048 resolution *Internal integration 64MB/128MB DDR2 *Typecal Power: 500mW including DDR (1080P@25fps H.265) *Fast boot and quick stream
*Surveillance level ISP engine，LLL night vision *Smart H.264 Encoder engine,ultra low bit stream control *High performance computing platform,visual intelligent analysis *The leading low power technology *CPU operating at 1.0Ghz, base on MIPS *128KB L2-cache *MXU2.0 (SIMD128) *Video and audio intelligent analysis *High Level ISP, support 3D denoise, WDR *Smart H.264, high profile, maximum 2048x2048 resolution *Package with 64MB/128MB DDR2 *Less than 600mw typical power consumption *Fast boot and quick stream
*Professional image signal process and H.264 encoding(960P) *High performance CPU with intelligent analysis (>1G CPU, 128Bits SIMD engine) *Lowest power consumer in IPC market (typical running power: 390mw including DDRII ) *CPU operating at 1.0Ghz, base on MIPS *128KB L2-cache *MXU2.0 (SIMD128) *Video and audio intelligent analysis *High Level ISP, support 3D denoise, WDR *H.264 baseline, mainprofile, up to 960P resolution *Package with 64MB DDR2 *Low to less than 400mw power consumption including DDRII in working time
*Smart H.265/H.264 encoding engine, full real-time performance *Starlight-level ISP, multiple noise reduction *HD resolution,5M/4M/3M/2M/1M simultaneous support *Ultra low power consumption, minimum 300MW *Support microphone arrays, activate audio and video applications *Built-in vector acceleration engine to support end-level lightweight AI applications *CPU operating at 1.0GHZ,base on MIPS *64KB L1-Cache/128KB L2-Cache *MXU2.0 (SIMD128) *Video and audio intelligent analysis *High Level ISP, Support AE, AWB, AF, 3D De-noise, WDR, DRC *Smart H.265, high profile, maximum 2688x2048 resolution *Internal integration 64MB/128MB DDR2 *Typecal Power: 500mW including DDR (1080P@25fps H.265) *Fast boot and quick stream
Ingenic products are not designed for and should not be used in any medical or life sustaining or supporting equipment.
1.8V 64M-BIT SERIAL FLASH MEMORY WITHDUAL/QUAD SPI & QPIThe W25Q64FW (64M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power.
Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.
IPv6 network supported