• Ultra-small and low-cost IoT module (26 * 37 * 3 mm)
• Powered by Ingenic X1000E processor，up to 1.0 GHz
• Supports 64MB LPDDR (built-in X1000E)，32MB SPI Flash (compatible with SPI NAND)
• Supports Wi-Fi 2.4GHz IEEE 802.11 b/g/n
• Supports Bluetooth 4.1 and Bluetooth Low Energy
• Supports Ethernet, Display, Digital and Analog MIC, Camera, SD card, USB 2.0 OTG etc.
Brand:
IngenicProducts Overview:
• High performance:
- Running up to 1GHz, supporting hardware FPU and SIMD instructions.
- Being qualified for algorithms such as speech recognition, image recognition, denoising, echo cancellation, APE/FLAC decoding etc.
• Ultra-low power consumption:
- Standby: 2mW.
- Average: 200mW.
- Maximum: 700mW.
• Rich peripherals:
- Supports WiFi, bluetooth, ethernet, LCD, digital and analog MIC, camera, SD card, USB 2.0 OTG, UART, I2C, SPI, PWM, GPIO etc.
• Open source Linux SDK：
- Running Linux 3.10 kernel, supports WiFi and bluetooth protocols.
• Plated half-hole module：
- Can be used in target products, reducing time to market.
Target applications:
Halley2 Development Kit:
Halley2 Block Diagram:
Halley2 Detailed Specifications:
|
PHYSICAL |
|
|
Form factor |
94-pin plated half-hole module. |
|
Dimensions |
26 x 37 x 3 mm. |
|
ON-BOARD COMPONENTS |
|
|
Processor |
Ingenic X1000E SoC, up to 1.0 GHz.
- Embedded 64MB LPDDR. - Embedded high quality audio CODEC. |
|
Memory |
16MB SPI NOR flash.(Compatible with SPI NAND flash) |
|
Wi-Fi |
AP6214A(BCM43438） single-band 2.4GHz IEEE 802.11b/g/n. |
|
Bluetooth |
AP6214A(BCM43438） Bluetooth 4.1 (Bluetooth Low Energy), Bluetooth 3.0, Bluetooth 2.1 + EDR. |
|
POWER |
DC/DC（1.25V,1.8V,3.3V），LDO(2.5V) |
|
Clocks |
24MHz, 32.768kHz; 26MHz (Wi-Fi/BT). |
|
EXTERNAL INTERFACES (Note: signals of some ports are being multiplexed.) |
|
|
Display |
8/9/16-bit, SLCD. |
|
Digital MIC |
x 4. |
|
Analog MIC |
x 1. |
|
Line-In |
x 1. |
|
Camera |
8-bit, DVP. |
|
SD Card |
x 1. |
|
USB OTG |
Host & Client Modes . |
|
I2S |
Master & Slave Modes. |
|
I2C |
x 3. |
|
UART |
x 2. |
|
SPI |
x 2. |
|
PWM |
x 5. |
|
Ethernet MAC |
10/100 Mbps, RMII Interface. |
|
JTAG |
Standard EJTAG interface. |
|
POWER |
|
|
Input |
5V DC. |
|
Power consumption |
Standby (no radio): 2mW. Average: 200mW, Maximum (with radio): 700mW |
|
SOFTWARE |
|
|
Supported OS |
Linux 3.10. |
|
Code availability |
Open source. |
Prepare the Hardware
a) Power Supply
You may use either J1 or J4 to provide power to the Halley2 development kit.
1) POWER_DC 5V Input (J1). Power switch (K1) is used to enable/disable the power.
2) USB_DOWNLOAD Port (J4). Except power supply, this port can also be used to program the Flash.
b) Debug Port: USB_DEBUG (J12)
J12 is the USB to serial debug port.
Boot Halley2 Normally
First use two USB cables to connect the USB DOWNLOAD (J4) and USB DEBUG (J12) ports with your PC.
Then press the RESET key (SW4) to boot the Halley2.
Configure the parameters of the USB serial port to 57600bps-8N1.
Boot Halley2 to the USB BOOT MODE (Flashing the Halley2)
Press and release the RESET key (SW4) while keeping pressing download the BOOT key (SW3), then Halley2 will boot to the USB BOOT MODE.
You may use the USB cloner tool to flash the SPI flash under the USB BOOT MODE.
*Professional level imaging ISP, night vision enhancement *Smart H.264 coding engine, ultra low code flow control *Extreme BOM cost control *Leading low power technology *Built-in Ethernet PHY
• Professional video analysis AI coprocessor • High performance face/ up-body/ humanoid detection • Stable intrusion alarm, passenger flow statistics, face capture, face recognition and other AI applications • Extremely low running power consumption
*Smart H.265/H.264 encoding engine, full real-time performance *Starlight-level ISP, multiple noise reduction *HD resolution,5M/4M/3M/2M/1M simultaneous support *Ultra low power consumption, minimum 300MW *Support microphone arrays, activate audio and video applications *Built-in vector acceleration engine to support end-level lightweight AI applications *CPU operating at 1.0GHZ,base on MIPS *64KB L1-Cache/128KB L2-Cache *MXU2.0 (SIMD128) *Video and audio intelligent analysis *High Level ISP, Support AE, AWB, AF, 3D De-noise, WDR, DRC *Smart H.265, high profile, maximum 2688x2048 resolution *Internal integration 64MB/128MB DDR2 *Typecal Power: 500mW including DDR (1080P@25fps H.265) *Fast boot and quick stream
*Surveillance level ISP engine，LLL night vision *Smart H.264 Encoder engine,ultra low bit stream control *High performance computing platform,visual intelligent analysis *The leading low power technology *CPU operating at 1.0Ghz, base on MIPS *128KB L2-cache *MXU2.0 (SIMD128) *Video and audio intelligent analysis *High Level ISP, support 3D denoise, WDR *Smart H.264, high profile, maximum 2048x2048 resolution *Package with 64MB/128MB DDR2 *Less than 600mw typical power consumption *Fast boot and quick stream
*Professional image signal process and H.264 encoding(960P) *High performance CPU with intelligent analysis (>1G CPU, 128Bits SIMD engine) *Lowest power consumer in IPC market (typical running power: 390mw including DDRII ) *CPU operating at 1.0Ghz, base on MIPS *128KB L2-cache *MXU2.0 (SIMD128) *Video and audio intelligent analysis *High Level ISP, support 3D denoise, WDR *H.264 baseline, mainprofile, up to 960P resolution *Package with 64MB DDR2 *Low to less than 400mw power consumption including DDRII in working time
*Smart H.265/H.264 encoding engine, full real-time performance *Starlight-level ISP, multiple noise reduction *HD resolution,5M/4M/3M/2M/1M simultaneous support *Ultra low power consumption, minimum 300MW *Support microphone arrays, activate audio and video applications *Built-in vector acceleration engine to support end-level lightweight AI applications *CPU operating at 1.0GHZ,base on MIPS *64KB L1-Cache/128KB L2-Cache *MXU2.0 (SIMD128) *Video and audio intelligent analysis *High Level ISP, Support AE, AWB, AF, 3D De-noise, WDR, DRC *Smart H.265, high profile, maximum 2688x2048 resolution *Internal integration 64MB/128MB DDR2 *Typecal Power: 500mW including DDR (1080P@25fps H.265) *Fast boot and quick stream
Ingenic products are not designed for and should not be used in any medical or life sustaining or supporting equipment.
The TLV733 series low-dropout linear regulator (LDO) has ultra-small size and low static current, can provide 300mA sourcing current, and has excellent line and load transient performance. This series of devices can provide a typical accuracy of 1%.
Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.
IPv6 network supported