GMT G5695TO1U 1.4MHz 1A Synchronous Step-Down Regulator
The G5695 is a high efficiency monolithic synchronous buck regulator using a constant frequency, current mode architecture.
The G2138 is a high-performance step-up charge pump and inverter to generate two output voltages, it is including pumping controllers for positive and negative output voltage.
Brand:
GMTGeneral Description
The G2138 is a high-performance step-up charge pump and inverter to generate two output voltages, it is including pumping controllers for positive and negative output voltage. The following content contains the detailed description and the information of component selection. The positive charge-pump controller provides adjustable regulated output AVDD and fixed -1 ratio of AVEE to supply the TFT. The pumping clock can be generated by internal circuit, to reduce the control signal from driver IC. Or the charge and pump state can be synchronized with LCD display TE signal (PSYNC), it can reduce the interference to display quality when states change. The device requires only five (12 pins) small and low-cost ceramic capacitors is available in UDFN1.5X2.4-12 package for smart phone LCD panel’s driver IC.
Features
Charge pump x2 mode for positive AVDD and x-1 mode for negative AVEE
2.5V to 4.8V input supply voltage range
AVDD output range:5.8V to 6.0V
AVEE output range:-5.8V to -6.0V
Charge pump clock synchronized with PSYNC for benefit of low noise
Positive and Negative regulated charge Pump with Diode free
External Capacitor 5C or 7C only
UDFN1.5X2.4-12 (1.5mm * 2.4mm * 0.5 mm) package is available
Control signals voltage 1.65V to 4.8V
Applications
TFT LCD POWER IC
Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.