product
Products
Home /

SEMICONDUCTORS

/

Electronic Components

/

GD

/GD FLASH MEMORY GD25Q32CSIG SOP-8

GD FLASH MEMORY GD25Q32CSIG SOP-8

GENERAL DESCRIPTION  

The GD25Q32C (32M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the  Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). The Dual I/O  data is transferred with speed of 240Mbits/s and the Quad I/O & Quad output data is transferred with speed of 480Mbits/s.

  • Brand:

    GD
  • Product Details

FEATURES  

◆ 32M-bit Serial Flash 

◆ Program/Erase Speed   

-4096K-byte -Page Program time: 0.6ms typical  

 -256 bytes per programmable page

 -Sector Erase time: 50ms typical   

-Block Erase time: 0.15/0.25s typical  

◆ Standard, Dual, Quad SPI

 -Chip Erase time: 15s typical  

 -Standard SPI: SCLK, CS#, SI, SO, WP#, HOLD#  

 -Dual SPI: SCLK, CS#, IO0, IO1, WP#, HOLD# 

◆ Flexible Architecture   

-Quad SPI: SCLK, CS#, IO0, IO1, IO2, IO3 

-Sector of 4K-byte   

-Block of 32/64k-byte  

◆ Low Power Consumption  

◆ High Speed Clock Frequency

 -20mA maximum active current   

-120MHz for fast read with 30PF load 

-1uA maximum power down current   

-Dual I/O Data transfer up to 240Mbits/s  

-Quad I/O Data transfer up to 480Mbits/s 

◆ Advanced Security Features(1)   

-Continuous Read With 8/16/32/64-byte Wrap 

-3*1024-Byte Security Registers With OTP Locks  

 -Discoverable parameters(SFDP) register 

 ◆ Software/Hardware Write Protection

 ◆ Single Power Supply Voltage  

-Write protect all/portion of memory via software 

-Full voltage range:2.7~3.6V   

-Enable/Disable protection with WP# Pin  

-Top or Bottom, Sector or Block selection 

◆ Package Information  

-SOP8 (208mil) 

 -SOP8 (150mil) 

 -VSOP8 (208mil) 

 ◆ Cycling endurance 

-DIP8 (300mil)   

-Minimum 100,000 Program/Erase Cycles -WSON8 (5*6mm)  

-USON8 (3*3mm)  

◆ Data retention 

-USON8 (4*3mm)  

 -20-year data retention typical 

-TFBGA-24(6*4 ball array)  

-TFBGA-24(5*5 ball array

Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Product Categories

New Products

Related Products
GD25Q16CSIG

GD FLASH MEMORY GD25Q16CSIG SOP-8_208mil

GENERAL DESCRIPTION  The GD25Q16C(16M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the  Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). The Dual I/O  data is transferred with speed of 240Mbits/s and the Quad I/O & Quad output data is transferred with speed of 480Mbits/s.

 GD25Q64CSIG

GD FLASH MEMORY GD25Q64CSIG SOP-8

GENERAL DESCRIPTION  The GD25Q64C (64M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports the  Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#), and I/O3 (HOLD#). The Dual I/O  data is transferred with speed of 240Mbits/s and the Quad I/O & Quad output data is transferred with speed of 480Mbits/s.

GD25Q128CSIG

GD FLASH MEMORY GD25Q128CSIG SOP8

GENERAL DESCRIPTION   The GD25Q128C(128M-bit) Serial flash supports the standard Serial Peripheral Interface (SPI), and supports  the Dual/Quad SPI: Serial Clock, Chip Select, Serial Data I/O0 (SI), I/O1 (SO), I/O2 (WP#) and I/O3 (HOLD#/  RESET#). The Dual I/O data is transferred with speed of 208Mbits/s and the Quad I/O & Quad Output data is  transferred with speed of 320Mbits/s.

SAMSUNG K4A8G165WB-BCRC

SAMSUNG K4A8G165WB-BCRC FBGA-96 8Gb DDR4 SDRAM

The 8Gb DDR4 SDRAM B-die is organized as a 64Mbit x 16 I/Os x 8banks  device. This synchronous device achieves high speed double-data-rate  transfer rates of up to 2666Mb/sec/pin (DDR4-2666) for general applications.

3V 128Mbit Serial Flash Memory With

Winbond W25Q128JVSIQ 3V 128Mbit Serial Flash Memory With

DUAL/QUAD SPIThe W25Q128JV supports standard SPI, Dual SPI and Quad SPI operation. Standard SPI instructionsuse the unidirectional DI (input) pin to serially write instructions, addresses or data to the device on therising edge of the Serial Clock (CLK) input pin. Standard SPI also uses the unidirectional DO (output) toread data or status from the device on the falling edge of CLK.Dual and Quad SPI instructions use the bidirectional IO pins to serially write instructions, addresses ordata to the device on the rising edge of CLK and read data or status from the device on the falling edge ofCLK. Quad SPI instructions require the non-volatile Quad Enable bit (QE) in Status Register-2 to be set.When QE=1, the /WP pin becomes IO2 and the /HOLD pin becomes IO3.

TV LVDS wire

Wholesale Cable Assembly Terminal Connector Wire Harness Customized LED TV LVDS Cable

LVDS is the abbreviation of Low Voltage Differential Signaling, that is, Low Voltage Differential signal.LVDS is the main way to connect the image signal from the signal processing board to the display screen in the current LCD TV due to its features of low noise, low EMI, low power consumption, high bit rate and simple connection.

wireless display dongle miracast dongle

China wholesale same screen wireless display dongle miracast dongle CKD SKD OEM ODM solutions

*A new way to define your digital life*Wireless Miracast Dongle + Normal TV= Intelligent TV*Dual Mode: Same Screen, Cast Screen*Screening is more stable. Share the phone screen to the TV/Projector, enjoy the big screen fun.*Fast transmission speed and strong performance stability. Quick and effective heat emition, the transmission is more stable.*Simple but Fashionable, easy to carry. Travel on business and enjoy the fun of the big screen at any time.*Easily start a meeting. Mobile connected to the projector/TV  clear presentation of the meetinig. Suitable for business meeting, presentations or training lectures.*Connect lift/Accompany enducation. Convenient for teachers to teach new knowledge, make education more intelligent, effective and fun.*Mirror games to bigger screen, more enjoyable. Playing games with large screen to enhance and picture effect. Creating a better game atmosphere.

MPS MP1484EN-LF-Z

MPS MP1484EN-LF-Z 3A, 18V, 340KHz Synchronous Rectified Step-Down Converter

The MP1484 is a monolithic synchronous buck regulator.

Please tell us your needs

Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.

partners 8
Partners7
Partners6
Partners5
Partners4
Partners3
Partners2
Partners1
Leave a message Request A Free Quote
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.