product
Products
Home /

Electronic Components

/

AIROHA

/AIROHA Satellite Tuner Single Chip Tuner for DVB-S/ABS-S Receiver

AIROHA Satellite Tuner Single Chip Tuner for DVB-S/ABS-S Receiver

High Performance and Cost-Effective Satellite Tuner


AIROHA is a leading company for silicon satellite tuner. By leveraging its core RF IC design expertise, we provide high performance and cost-effective solutions to cover DVB-S/S2, ISDB-S, and ABS-S for worldwide set-top-box market and with proved large quantity of shipment records; our quality has been recognized by worldwide customers.

  • Product Details

Products Overview:

AIROHA is a brand of silicon satellite tuner. By leveraging its core RF IC design expertise, we provide high-performance and cost-effective solutions that cover the global set-top box market of dvb-s/S2, isdb-s and abs-s, and have proven extensive freight records; Our quality is recognized by customers worldwide.

AIROHA is up to electronics to mobile phone power amplifier (PA), rf Switch (T/R Switch), wi-fi rf transceiver, bluetooth low power single chip power, low noise amplifier (LNA), digital TV set-top boxes and satellite tuner (DVB - S/S2), satellite positioning chip, bluetooth wireless audio system solutions, WiFi Internet of single chip, and smart devices and wearable system solutions. At present, AIROHA's products have been widely used in various digital TV and set-top boxes, mobile phones, vehicle-mounted tracking systems, bluetooth audio devices, wearable products and various smart home devices.


AV2028 - Single Chip Tuner for DVB-S/ABS-S Receiver


Products Description:

The AV2028 is a highly integrated silicon tuner for DVB-S/ABS-S standard. It integrates a synthesizer, crystal oscillator, LDO, loop through path, and a direct conversion receiver including LNA, RF variable gain amplifiers, Mixer, programmable channel filter, and PGA.

The low noise figure of the receiver and the loop through path eliminates the need of an external LNA. The integrated crystal oscillator can provide a reference clock for demodulator. The LDO supplies all the internal blocks that only an external voltage source is required. The AV2028 requires only a small number of external components, thus enables very competitive design.

The AV2028 implements an automatic gain control mechanism that only an analog control signal from the demodulator is required to form a close-loop gain control. The mechanism will arrange the gain of the receiver blocks to achieve best performance according to the control signal voltage. The embedded automatic calibration mechanism provides precise control of channel filter bandwidth and DC offset, no additional calibration procedure is required.


Key Features:

• Input RF Frequency: 950MHz to 2150MHz

• Single +3.3V Power Supply

• Embedded LNA, Mixer, VCO, crystal oscillator, and LDO

• Low Noise Figure: 5dB, typical

• Embedded DC offset Cancellation Circuit

• Programmable channel filter with bandwidth from 4MHz to 40MHz

• Automatic gain control

• Embedded RF signal loop through path

• Single-ended I/Q interface

• 2-wire serial control interface

• QFN3*3mm 16pin package


Application:

• DVB-S Setup Box


Send A Message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Related Products
OEM customized DVB S2 satellite TV receiver

Factory OEM customized DVB S2 satellite TV receiver full hd set top box upgrade software wifi free to air wifi wireless adapte

Place of Origin: ChinaBrand Name: INDASINAModel Number: Ali M3510CFTA(Free To Air): YesType: Digital, DVB-S2/HD/MPEG-4/H.264High Definition: YesChipset: Ali M3510CVideo Resolution: 1080P/1080i/720p/576P/576i/480p/480iInput Voltage: AC 80-260V 50~60HzUSB: Two USBFunction: 3G, Wifi, IPTV, YouTube, Weather, Google MapFeature: IKS, SKS, CCCAM, New cam, Mscam,BISS, POWERVU, Dolby

M15T2G16128A-DEBG2LS

ESMT DDR3 SDRAM M15T2G16128A-DEBG2LS

16M x 16 Bit x 8 Banks  DDR3(L) SDRAMDescription  The 2Gb Double-Data-Rate-3(L) (DDR3(L)) DRAM is double data rate architecture to achieve high-speed operation. It is  internally configured as an eight bank DRAMs.  The 2Gb chip is organized as 16Mbit x 16 I/Os x 8 bank devices. These synchronous devices achieve high speed  double-data-rate transfer rates of up to 1866 Mb/sec/pin for general applications.  The chip is designed to comply with all key DDR3(L) DRAM key features and all of the control and address inputs are  synchronized with a pair of externally supplied differential clocks. Inputs are latched at the cross point of differential clocks (CK  rising and  CK  falling). All I/Os are synchronized with a single ended DQS or differential DQS pair in a source synchronous  fashion.  These devices operate with a single 1.35V -0.067V/+0.1V or 1.5V ± 0.075V power supply and are available in BGA packages.

ALI M3510C

ALI M3510C HD DVB-S2 SoC

M3510C is a cost-effective HD DVB-S2 SoC. It supports 2D vector graphic engine, DDR3, HDMI, USB and HD multi-format video decoder.

wireless 1080P IP camera

Wireless 1080P IP camera wifi home security surveillance camera for elder/pet/nanny/tilt

3D navigation2 megapixels low cost motion detection wireless ip camera360 degree click where see where

TLC549CDR

TI SOP8 TLC549CDR Communication IC

8-BIT ANALOG-TO-DIGITAL CONVERTERS WITH SERIAL CONTROLDescriptionThe TLC548 and TLC549 are CMOS analog-to-digital converter (ADC) integrated circuits built around an 8-bitswitched-capacitor  successive-approximation  ADC.  These  devices  are  designed  for  serial  interface  with  amicroprocessor or peripheral through a 3-state data output and an analog input. The TLC548 and TLC549 useonly  the  input/output  clock  (I/O  CLOCK)  input  along  with  the  chip  select  (CS)  input  for  data  control.  Themaximum I/O CLOCK input frequency of the TLC548 is 2.048 MHz, and the I/O CLOCK input frequency of theTLC549 is specified up to 1.1 MHz.Operation of the TLC548 and the TLC549 is very similar to that of the more complex TLC540 and TLC541devices; however, the TLC548 and TLC549 provide an on-chip system clock that operates typically at 4 MHzand requires no external components. The on-chip system clock allows internal device operation to proceedindependently of serial input/output data timing and permits manipulation of the TLC548 and TLC549 as desiredfor a wide range of software and hardware requirements. The I/O CLOCK together with the internal system clockallow high-speed data transfer and conversion rates of 45 500 conversions per second for the TLC548, and40 000 conversions per second for the TLC549.Additional TLC548 and TLC549 features include versatile control logic, an on-chip sample-and-hold circuit thatcan  operate  automatically  or  under  microprocessor  control,  and  a  high-speed  converter  with  differentialhigh-impedance reference voltage inputs that ease ratiometric conversion, scaling, and circuit isolation fromlogic and supply noises. Design of the totally switched-capacitor successive-approximation converter circuitallows conversion with a maximum total error of ±0.5 least significant bit (LSB) in less than 17 μs.The TLC548C and TLC549C are characterized for operation from 0°C to 70°C. The TLC548I and TLC549I arecharacterized for operation from – 40°C to 85°C

3V 256Mbit Serial Flash Memory With

Winbond W25Q256JVFIQ 3V 256Mbit Serial Flash Memory With

DUAL/QUAD SPI For Industrial & Industrial Plus Grade The W25Q256JV supports standard SPI, Dual SPI and Quad SPI operation. Standard SPI instructions use the unidirectional DI (input) pin to serially write instructions, addresses or data to the device on the rising edge of the Serial Clock (CLK) input pin. Standard SPI also uses the unidirectional DO (output) to read data or status from the device on the falling edge of CLK.

ST MCU STM32F051C8T6

ST MCU STM32F051C8T6 LQFP-48

Low- and medium-density advanced ARM™-based 32-bit MCU with  16 to 64 Kbytes Flash, timers, ADC, DAC and comm. interfaces

Winbond W25X40CLSNIG

Winbond W25X40CLSNIG 2.5/3/3.3 V 4Mbit Serial Flash Memoery With

4KB SECTORS AND DUAL I/O SPI The W25X40CL supports standard SPI and Dual SPI operation. Standard SPI instructions use the  unidirectional DI (input) pin to serially write instructions, addresses or data to the device on the rising  edge of the Serial Clock (CLK) input pin. Standard SPI also uses the unidirectional DO (output) to read  data or status from the device on the falling edge of CLK.

Please tell us your needs

Indasina, a group corporation composed of factories, is committed to a variety of electronic products and the overall customized solutions.

partners 8
Partners7
Partners6
Partners5
Partners4
Partners3
Partners2
Partners1
Leave a message Request A Free Quote
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.