*Smart H.265/H.264 encoding engine, full real-time performance *Starlight-level ISP, multiple noise reduction *HD resolution,5M/4M/3M/2M/1M simultaneous support *Ultra low power consumption, minimum 300MW *Support microphone arrays, activate audio and video applications *Built-in vector acceleration engine to support end-level lightweight AI applications *CPU operating at 1.0GHZ,base on MIPS *64KB L1-Cache/128KB L2-Cache *MXU2.0 (SIMD128) *Video and audio intelligent analysis *High Level ISP, Support AE, AWB, AF, 3D De-noise, WDR, DRC *Smart H.265, high profile, maximum 2688x2048 resolution *Internal integration 64MB/128MB DDR2 *Typecal Power: 500mW including DDR (1080P@25fps H.265) *Fast boot and quick stream

*Professional image signal process and H.264 encoding(960P) *High performance CPU with intelligent analysis (>1G CPU, 128Bits SIMD engine) *Lowest power consumer in IPC market (typical running power: 390mw including DDRII ) *CPU operating at 1.0Ghz, base on MIPS *128KB L2-cache *MXU2.0 (SIMD128) *Video and audio intelligent analysis *High Level ISP, support 3D denoise, WDR *H.264 baseline, mainprofile, up to 960P resolution *Package with 64MB DDR2 *Low to less than 400mw power consumption including DDRII in working time

The NuMicro® M452 USB series 32-bit microcontroller (MCU) is embedded with the ARM® Cortex®-M4 core and operating at 2.5V ~ 5.5V and -40℃ ~ 105℃, and provides 22.1184 MHz internal oscillator (1% accuracy at 25℃, 5V) , Data Flash configurable and high immunity (8KV ESD, 4KV EFT) . Package types include LQFP48, LQFP64 and LQFP100. Model No.: M452VG6AE

• Ultra-small and low-cost IoT module (26 * 37 * 3 mm) • Powered by Ingenic  X1000E processor，up to 1.0 GHz • Supports 64MB LPDDR (built-in X1000E)，32MB SPI Flash (compatible with SPI NAND) • Supports Wi-Fi 2.4GHz IEEE 802.11 b/g/n • Supports Bluetooth 4.1 and Bluetooth Low Energy • Supports Ethernet, Display, Digital and Analog MIC, Camera, SD card, USB 2.0 OTG etc.

The W25Q32JV (32M-bit) Serial Flash memory provides a storage solution for systems with limited space,pins and power. 

The W632GU6NB is a 2G bits DDR3L SDRAM, organized as 16,777,216 words  8 banks  16 bits.  This device achieves high speed transfer rates up to 2133 MT/s (DDR3L-2133) for various  applications. 

1.8V 32M-BIT SERIAL FLASH MEMORY WITH  DUAL, QUAD SPI

Ingenic products are not designed for and should not be used in any medical or life sustaining or supporting equipment.

The STM32F105xx and STM32F107xx connectivity line family incorporates the high-performance ARM® Cortex®-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 256 Kbytes and SRAM 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. 

Low- and medium-density advanced ARM™-based 32-bit MCU with  16 to 64 Kbytes Flash, timers, ADC, DAC and comm. interfaces

Medium-density performance line ARM-based 32-bit MCU with 64  or 128 KB Flash, USB, CAN, 7 timers, 2 ADCs, 9 com. interfaces

Value-line ARM®-based 32-bit MCU with up to 256-KB Flash,  timers, ADC, communication interfaces, 2.4-3.6 V operation