*31.5inch/32inch overall CKD and SKD solution with high performance *Model No.: 315S02 *OD35 *Whole plastic cabinet, reduce the cost, CKD and SKD both can do *Different optical solutions could be optional to meet your actual requirements *All Electronic materials, Ingredients and Screws both can be customerized

*31.5inch/32inch overall CKD and SKD solution with high performance *Model No.: 315S03 *OD35 *High quality cabinet, plastic housing and metal back plate, CKD and SKD both can do *Different optical solutions could be optional to meet your actual requirements *All Electronic materials, Ingredients and Screws both can be customerized

*31.5inch/32inch overall CKD and SKD solution with high performance *Model No.: 315S01 *OD35 *High quality cabinet, plastic housing and metal back plate, CKD and SKD both can do *Different optical solutions could be optional to meet your actual requirements *All Electronic materials, Ingredients and Screws both can be customerized

NuMicro® MS51 industrial series microcontrollers is based on 1T 8051 core, running up to 24 MHz, with up to 32 Kbyte of Flash memory and up to 2 Kbyte of SRAM. It supports one high precision 24 MHz allowing ± 1 % deviation and one 10 kHz internal RC Oscillators, operating at 2.4 V ~ 5.5 V voltage and - 40 ℃ ~ 105 ℃. NuMicro® MS51 is equipped with special features such as up to 15 channels of 500k SPS 12-bit ADC, up to 12 channels of PWM with independent counters and GPIO supports 20 mA driving capability, also with ESD resistivity 8 kV and EFT resistivity 4.4 kV. Combined all these above high performance features, MS51 series is suitable for high-reliability industrial and consumer applications. MS51 series offers 10-33 pin packages for a broad range of applications.

The NuMicro® M452 USB series 32-bit microcontroller (MCU) is embedded with the ARM® Cortex®-M4 core and operating at 2.5V ~ 5.5V and -40℃ ~ 105℃, and provides 22.1184 MHz internal oscillator (1% accuracy at 25℃, 5V) , Data Flash configurable and high immunity (8KV ESD, 4KV EFT) . Package types include LQFP48, LQFP64 and LQFP100. Model No.: M452VG6AE

*Frameless 31.5inch 32inch overall CKD and SKD solution with high performance *Model No.: 315F0 *OD35 *Super Frameless cabinet, excellent design *Different optical solutions could be optional to meet your actual requirements *All Electronic materials, Ingredients and Screws both can be customerized

The N76E003 series is particularly suitable for applications such as battery chargers, Sound Blaster audio controllers, LED lighting controllers, small home appliance controllers, thermostats and smoke sensors.

Suitable for applications such as battery chargers, Sound Blaster audio controllers, LED lighting controllers, small home appliance controllers, thermostats and smoke sensors.

Operating range 2.5V ~ 5.5V, operating temperature-40 ℃ ~ +85 ℃Application: LED lighting control, industrial control, motor control, etc.

DUAL, QUAD SPI For Industrial & Industrial Plus Grade The W25Q32JV supports standard SPI, Dual SPI and Quad SPI operation. Standard SPI instructions use the unidirectional DI (input) pin to serially write instructions, addresses or data to the device on the rising edge of the Serial Clock (CLK) input pin. Standard SPI also uses the unidirectional DO (output) to read data or status from the device on the falling edge of CLK.

Low-Voltage Differential Signaling (LVDS) is a technology addressing the needs of today’s high performance data transmission applications. LVDS is a low voltage differential signaling system which is an electrical system and can run at very high speeds over inexpensive, twisted-pair, stranded copper cables. These twisted pairs maintain the 100ohm differential impedance requires by LVDS data signals. LVDS has become a preferred differential standard due to its capability of delivering high data rates while consuming less power than any other interfacing technologies. LVDS uses high-speed analog circuit techniques to provide multi gigabit data transfers on copper interconnects and is a generic interface standard for high-speed data transmission. This is why the LVDS standard is becoming the most popular differential data transmission standard in the industry.

Target applications: wearable devices, smart remote controls, Internet endpoint devices, smart homes, smoke detection devices, battery devices, etc.